• Nouveau
M5StickC PLUS2 ESP32 Mini IoT Development Kit
  • M5StickC PLUS2 ESP32 Mini IoT Development Kit
  • M5StickC PLUS2 ESP32 Mini IoT Development Kit
  • M5StickC PLUS2 ESP32 Mini IoT Development Kit
  • M5StickC PLUS2 ESP32 Mini IoT Development Kit

M5StickC PLUS2 ESP32 Mini IoT Development Kit

29,17 €

M5StickC PLUS2 is an iterative version of M5StickC PLUS, featuring the ESP32-PICO-V3-02 chip as the main controller with built-in WiFi functionality. The compact device integrates a wealth of hardware resources within its small form factor, including infrared, RTC, microphone, LED, IMU, buttons, buzzer, and more. It boasts a 1.14-inch TFT screen with a resolution of 135*240, driven by the ST7789V2. The battery capacity has been increased to 200mAh, and the interface also supports HAT and Unit series products. This compact and versatile development tool is designed to spark limitless creative possibilities.



  • ESP32-­PICO-­V3-­02-Base,support WiFi
  • Built-in 6-Axis IMU
  • IR transmitter
  • Microphone
  • RTC
  • Buttons, LCD(1.14 inch)
  • Built-in Lithium Polymer Battery@200mAh
  • Extendable Socket
  • Built-in Passive Buzzer
  • Wearable & Wall mounted
  • Compatible with multi-platform development:


  • 1x M5StickC Plus2


  • Internet of things terminal controller
  • Wearable devices
  • Stem education product
  • DIY creation


Resources Parameters
ESP32 ESP32-PICO-V3-02
240MHz dual core,support wifi,2 MB SPI PSRAM,8 MB SPI flash
Flash 8 MB flash
Power Input 5V @ 500mA
Port TypeC x 1, GROVE(I2C+I/0+UART) x 1
LCD screen 1.14 inch, 135*240 Colorful TFT LCD, ST7789v2
Button Custom button x 3
Buzzer built-in buzzer
RTC BM8563
Battery 200mAh @ 3.7V
Antenna 2.4G 3D Antenna
PIN port G0, G25/G36, G26, G32, G33
Operating Temperature 0°C to 60°C
Case Material Plastic ( PC )
Product Size 48*25*13mm
Package Size 114*64*23mm
Product Weight 17g
Package Weight 24.8g


  • Hardware difference

    Product Name SoC Power management Battery Capacity Memory UART Chip Body Color
    M5STICKC PLUS ESP32-PICO-D4 AXP192 120mAh 520KB SRAM and 4MB Flash CH522 orange red
    M5STICKC PLUS2 ESP32-PICO-V3-02 \ 200mAh 2MB PSRAM and 8 MB flash CH9102 orange

    Pin difference

    Product Name IR LED TFT BUTTON A BUTTON B BUTTON C(WAKE) HOLD Battery Voltage Detection
    M5STICKC PLUS G9 G10 MOSI(G15) CLK(G13) DC(G23) RST(G18) CS(G5) G37 G39 Normal buttons, non-programmable / Read via AXP192 configuration
    M5STICKC PLUS2 G19 G19 MOSI(G15) CLK(G13) DC(G14) RST(G12) CS(G5) G37 G39 G35 G4 G38

    The difference between turn on and off

    Product Name Power on Power off
    M5STICKC PLUS Press the reset BUTTON (BUTTON C) for at least 2 seconds Press the reset BUTTON (BUTTON C) for at least 6 seconds
    M5STICKC PLUS2 It can be started by pressing "BUTTON C" for more than 2 seconds, or IRQ signal triggered by RTC regularly. After triggering the wake up signal, it is necessary to set the hold(G4) pin to high level (1) in program initialization to maintain the power supply, otherwise the device will enter the shutdown state again. When no USB external power supply is available, press BUTTON C for more than 6 seconds. Or when there is no USB external power supply, set HOLD(GPIO4)=0 in the program operation, that is, to achieve power off. When the USB is connected, press the "BUTTON C" button for more than 6 seconds to turn off the screen and enter the hibernation state, but not power off.

1 Produit

Vous aimerez aussi