Your cart
Il n'y a plus d'articles dans votre panier
Raspberry Pi Camera 1.3
SENRPICAM
11,68 €
16,58 €
-4,90 €
The Raspberry Pi Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data.
The board itself is tiny, at around 25mm x 20mm x 9mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. It connects to Raspberry Pi by way of a short ribbon cable. The camera is connected to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi.
The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
The camera is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system.
Features:
- Small board size: 25mm x 20mm x 9mm
- A 5MP (2592×1944 pixels) Omnivision 5647 sensor in a fixed focus module
- Support 1080p30, 720p60 and 640x480p60/90 video record
Documents:
2 Produits
Nouveau produit
No reviews
Les clients qui ont acheté ce produit ont également acheté...
Electronique
8-channel Bi-directional Logic Level Converter...
CNVELD8CH
4,33 €
This is a breakout board based on TXB0108 IC, the chip can provide bidirectional level shifting from any voltage to any voltage conversion, direction can be auto detected.
Electronique
IR Remote with receiver kit (Infrared remote...
REMJANKIT
4,58 €
One Remote to rule them all.
Outils de dev.
Platine avec terminaux à vis pour Arduino avec...
ECRMCS01110
8,33 €
The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, and a 5mm green LED.
Accueil
Micro USB Male to USB Female OTG Adapter...
ADATAOUSBMIC
5,00 €
Micro USB Male to USB Female OTG Adapter Android Tablet and Phone
Connectivité sans fil
HM-12 Bluetooth Module with Base Board HM12...
MODBLUETHHM12
16,00 €
Module Bluetooth based in a card for make easier its utilization.
Outils
Endoscope USB 3.5m (5.5mm, waterproof, Micro...
SENUSBENDO35M640
20,83 €
Si vous avez déjà perdu des choses dans une bouche d'égout (vos clés peut-être ?), voulu voir ce qu'il se passait dans une machine fermée ou d'autres choses de ce genre, ce produit est ce qu'il vous manquait et aurait pu vous sauver :) Son crochet ou son aimant permettent d'zttraper des choses tout en voyant ce qu'il se passe, même dans les recoins...
Electronique
L298 Dual H-Bridge Motor Driver
SESMOT103B1M
6,67 €
If you are building a robot with wheels, you need a dual H-Bridge driver like this one.
Double H driver module uses ST L298N dual full-bridge driver, an integrated monolithic circuit in a 15- lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive...
Electronique
USB Cable Type A to 5.5mm Barrel Jack Adapter
CONGENUSBBARREL
4,00 €
This is a simple adapter from an usb port to a barrel jack connector, very useful for Arduino and other mcu board with a barrel jack adapter.
Electronique
Adaptateur USB V3.1 type C mâle vers USB V3.0 A...
CONTAOTYPECUSB3
4,17 €
Adaptateur USB V3.1 type C mâle vers USB V3.0 A femelle OTG