LCD

 2
Available
Affichage

Serial Graphic LCD 128*64 (ST7565/67 ctrl) -...

iTeadStudio
LCDITEDIS008
19,15 €
Very high quality serial lcd with backlight, to add a graphic display to your project in minutes, without the need of much IO lines with fast refresh rate.
 2
  • Prix réduit / -2,00 €
Available
Affichage

Graphic LCD 128*64 (White on Blue) (screen)

iTeadStudio
LCDITE12864WB
14,00 € 16,00 €
This is a framed graphical LCD 64x128 with yellow or blue black-light . This unit is a very clear STN type LCD with a simple command interface.
 2
Available
Affichage

16x1 Characters LCD (screen)

LCD00002
7,92 €
This cheap 16x1 characters lcd is perfect for use with an arduino or any other microcontroller to display data quickly. It is compatible with the Hitachi HD44780 lcd driver.
 2
  • Prix réduit / -3,11 €
Available
Affichage

Nokia 5110 LCD (screen)

iTeadStudio
LCDNOK5110
6,00 € 9,11 €
Nokia 5110 LCD is a low-cost 84*48 pixels graphic LCD. It uses the PCD8544 controller. The PCD8544 interfaces to microcontrollers through a serial bus interface (5-wires).
 2
Available
Affichage

1.5" Color OLED (SSD1351, 128x128)

OLEJANCOL15
32,50 €
It is a nice and simple color 1.5" oled module with nearly no borders. What more could we ask for ?
 2
Available
Affichage

2.8" Serial TFT LCD Display (SPI, 240x320,...

LCDELE28ILI9341
19,90 €
This great little display boasting a 320x240 resolution has a wide support for all your MCU and little ARM/Linux-based boards. It will work on Arduino, STM32, Raspberry Pi and others.Oh, did I mention it also has an SD card slot ? Making it maybe one of the best value display we can have to offer.
 2
  • Prix réduit / -3,92 €
Available
Affichage

16x2 Characters LCD (White on Green) (screen)

LCD00001G
4,00 € 7,92 €
This cheap 16x2 characters lcd is perfect for use with an arduino or any other microcontroller to display data quickly. It is compatible with the Hitachi HD44780 lcd driver.
 2
Out of stock
Outils de dev.

ESP32-WROVER-KIT

MCBESP32WROVER
41,67 €
ESP-WROVER-KIT ESP-WROVER-KIT targets the high performance requirements with 4.5 MB of RAM and a dual core 240 MHz CPU. Create Internet cameras, smart displays or Internet radios with this highly integrated ultra low power module by connecting LCDs, cameras, microphones and codecs to it. Have fun!
 2
Available
Affichage

LCD IIC Interface Converter Board

MODJANBOARD1602
3,25 €
Simply the interface of 1602 to IIC, save more IOs, with this board you only need two IOs. This board is also supporting 2004A which is also available in our store.
 2
Out of stock
Affichage

Case for Raspberry Pi Official 7" Touchscreen

CASEOND7LCD
42,00 €
Our black case houses a 7 inch Raspberry Pi Touch Screen and an attached Raspberry Pi board (neither of which are included), to provide you with a protective and presentable LCD device.
Out of stock
Affichage

Grove - OLED Display 96*96 (screen)

Seeed Studio
OLEDSESOLE42178P
14,17 €
Twig/Grove - OLED 96x96 twig is a 16 color grayscale 96×96 dot matrix OLED display module with Grove compatible 4pin I2C interface.Twig - OLED 96x96 is constructed with 96 x 96 dot matrix OLED module ([ LY120])and SSD1327 driver IC. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim / thin outline,...
 2
Available
Affichage

20x4 Characters LCD (White on Blue) (screen)

LCD2004WB
9,00 €
This cheap 20x4 characters lcd is perfect for use with an arduino or any other microcontroller to display data quickly. It is compatible with the Hitachi HD44780 lcd driver.
 2
Out of stock
Outils de dev.

ITDB02 Arduino Mega Shield (Arduino Compatible)

ASHITDB02MEG
11,00 €
The ITDB02 LCD modules works in 3.3V voltage level and are not compatible with Arduino Mega pins, for that reason, this Arduino MEGA shield connects with these LCDs. Now you can directly plug the ITDB02 Series LCDs in the shield and stand on the Arduino board.
 2
Available
Affichage

Grove - OLED Display 128*64 (screen)

Seeed Studio
OLEDSEDDISP12
14,17 €
LED 128×64 Display module is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface .The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It has bigger screen and uses all the columns from the...
 2
  • Prix réduit / -2,50 €
Available
TFT LCD

2.2" Serial TFT LCD Display (SPI, 176X220,...

LCDGEN22ILI9341
10,00 € 12,50 €
This great little display boasting a 176X220 resolution has a wide support for all your MCU and little ARM/Linux-based boards. It will work on Arduino, STM32, Raspberry Pi and others.Oh, did I mention it also has an SD card slot ? Making it maybe one of the best value display we can have to offer.
 2
  • Prix réduit / -30,00 €
Out of stock
Outils de dev.

Raspberry Pi 5” LCD Display HDMI w/touch 800×480

LCDRPI5TCH
45,00 € 75,00 €
Very nice display compatible with Raspberry Pi 3 B, 2 B, 1 A+ and B+. It fits easily and has a very good response time thanks to its HDMI interface. This is the only one we've seen to boast this interface while still being a plug-in cape/shield. Setup time is quite fast, you just have to set the resolution in the config.txt of your raspberry pi and voilà...
 2
  • Prix réduit / -4,50 €
Available
Arduino

16x2 LCD Keypad shield for Arduino (Arduino...

iTeadStudio
ASH00003
8,00 € 12,50 €
This very popular LCD Keypad shield can be directly plug on an Arduino board, no soldering or fly-wiring needed.
 2
Out of stock
Outils de dev.

Raspberry PI LCD1602 Add-on

iTeadStudio
LCDRPI1602SHIELD
12,00 €
Raspberry PI LCD1602 Add-on is customized for Raspberry Pi interfaces based on LCD1602 display module.
 2
  • Prix réduit / -10,00 €
Available
Affichage

E-Ink Display Shield for Arduino (Arduino...

Seeed Studio
ASHSESEINKDSP
30,00 € 40,00 €
Do you like Amazon Kindle’s E-paper screen? E-ink Display Shield, an E-paper & shield which uses exactly the same techniques, provides you a smooth and clear reading experience for you. It has a super-low power consumption. It won’t consume power until next refreshing of its screen, which enables it to maintain a clear display even in the power-off...
 2
Available
LEDs & Lampes

I2C LCD Adapter module for 1602 2004 LCD...

ADPJANIICI2C
4,17 €
This is an I2C adapter module, with a backlit LCD display used in 160,220,048. Used for Arduino robot board, to use I2C I / O board interface savings, convenient and simple.
 2
Out of stock
Affichage

COG 128x64 Graphic LCD module (controller...

iTeadStudio
LCDITEDIS020
9,08 €
This is a GOG 128x64 Graphic LCD module (controller sed1565). It has an Yellow mode STN panel composed of 128 segments and 64 commons. The LCM can be easily accessed by microcontroller via parallel 6800 series interface.
 2
Available
Affichage

UART Serial 16x2 Characters LCD (White on Blue)...

LCDITESERIAL1602
12,50 €
Character LCM screen is a common display device, we provide 16×2 with Blue black light LCD. But these LCD need more than 6 pins for controlling and you need to know the control register and time series. This one is a bit different, you just send the message and voilà ! Only two pins :)
Product added to wishlist
Product added to compare.