Including Voltage measurement display, use internal MCU for control and measurement, measurement inaccuracy within ±0.05V, range from 0 ~ 40V. (To ensure the accuracy of the volt meter, please keep to input volt over 4V)
Pressing the button to switch the input or output voltage measurement, and a light show which way is being measured voltage, and save the settings, even then boot off.
Voltmeter can be turned off when not needed when you can easily touch the left button
With cable terminals, can still be easy to use even no soldering iron, and retention wire connection point
Input Voltage 4.0 ~ 40V (input voltage must be higher than output voltage 1.5v or more.)
Adjustable output voltage range of 1.25V ~ 37V continuously adjustable (input voltage must be higher than output voltage 1.5V)
The maximum output current of up to 3A, normal and stable operating current of 2A
Using an internal oscillator frequency 150KHz, belongs to the second generation of switching voltage regulator, low power consumption and high efficiency.
With overheating protection and short circuit protection
Package do NOT include the screw anymore, also product layout update slightly but more compact (Oct. 2014)
Les clients qui ont acheté ce produit ont également acheté...
This is a splittable 40 pin jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
This is a splittable 40 pin male-female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
Module de détection de mouvement fortement intégré et fréquement utilisé pour détecter les entrées et la présence dans une pièce. Il peut ête utilisé avec n'importe quel micro controlleur, en incluant les arduino, msp430, stm32 ou autres stellaris.
It's a small USB to TTL serial tool, using the PL2303 chip.
You can use it to connect some serial device to your PC via USB port, an avr, an msp430 or an stm32 for example.
It's very cheap compared to the ft232 alternative and works very well, up to more than 1mbit/s.