AVR USB Programmer

Seeed Studio
PRGSEDAVRUSB
24,00 €
This is a cheap usb programmer for the AVR chips (like the Arduino ones).

Nos engagements
  1. Tous nos produits sont livrés depuis Paris.
  2. Un doute sur votre achat ? Retournez-nous le produit sous 7 jours et nous vous remboursons.
  3. Nous choisissons et testons minutieusement les produits que nous vendons pour vous proposer uniquement le meilleur.
Features
  • Can be used to program most AVR microcontrollers via USB (USBASP compatible. See http://www.fischl.de/usbasp/ for details)
  • A general purpose AVR Mega48 board with all I/Os brought to sides of board and holes matching 0.1 inch pitch prototype boards. Excellent for AVR experiments and developments. (Note: 07302 is shipped with ATmega48 on board)
  • Can be separately powered by adding two commonly available through-hole components
  • Compatible header provided for programming 062 oscilloscopes
  • Can be converted to Uart/USB converter by simply reflashing it with AVRCDC firmware (available at http://www.recursion.jp/avrcdc/ ) and adding one resistor
 
Accessory included:
 
10-core programming ribbon cable
Couleur
2 Produits
Nouveau produit
No reviews

Les clients qui ont acheté ce produit ont également acheté...

2
Out of stock
Modules d'Alimentation

DC 5V 2A Micro USB Power supply

ENEADA5V2AMICUSB
8,00 €
This small yet powerful 5V DC 2A USB power module provides all your micro USB projects an easy to use power supply.
View
2
Available
Electronique

Dual female splittable jumper wires (300mm, 40...

CONSEDJMP40PFF
5,00 €
This is a splittable 40 pin dual female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
2
Available
Relais

Module de relais 4 canaux (5V, 250VAC)

RELITD4CH5V
8,00 €
Ceci est un module de relais à 4 canaux avec un contrôle à 5VDC. Il peut être connecté directement à une grande gamme de microcontrolleurs comme les Arduino, AVR, PIC, ARM, MSP430, STM32, etc.
Available
Image (Cameras)

Nappe IDC 26 positions pour Raspberry Pi

CABRPI26P
3,33 €
For moving parts between the motherboard, PCB board between the PCB and small electrical apparatus for data transmission.
Available
Electronique

Câble micro-usb 1.0M

CABMICUSB18M
4,00 €
Câble micro-usb de 1.5M parfait pour connecter vos cartes de prototypage à l'ordinateur ou alimenter votre smartphone ou raspberry pi.
  • Prix réduit / -2,00 €
Available
Accueil

Platine Xbee Shield pour Arduino

ASHITEXBEE
6,00 € 8,00 €
XBee Shield is an enhanced Zigbee XBee Series modules breakout board for Arduino, it can directly plug in with Arduino, and use any pin of the basic board to connect with the XBee module serial port.
  • Prix réduit / -4,90 €
Available
Electronique

Raspberry Pi Camera 1.3

SENRPICAM
11,68 € 16,58 €
The Raspberry Pi Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively...
2
  • Prix réduit / -5,50 €
Available
Arduino

nRF24L01+ with PA and LNA 2.4Ghz RF module...

WIRITENRF24L01PALNA
6,50 € 12,00 €
This is a long distance 2.4G wireless module which basic on nRF24L01+ chip, and there is the PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
Product added to wishlist
Product added to compare.