List of products by brand iTeadStudio

 2
  • Prix réduit / -20,00 €
Available
Outils de dev.

Iteaduino Plus A20 (ARM Linux board, Dual-core...

iTeadStudio
LINAA20ITEA
55,00 € 75,00 €
Iteaduino Plus is an open source ARM development board, which is based on Allwinner A20 SoC, small size, hacker friendly, extendable and very low-cost. Compare with Raspberry Pi, it has higher performance, SATA supported and more extension interfaces.
 2
Out of stock
Electronique

RTC& EEPROM Module DS3231 AT24C32

iTeadStudio
SENSEDIICRTCDS3231
5,50 €
    DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. Compared to the DS1302 solution, the DS3231 has many advantages, it function with a VCC ranging from 2.3V to 5.5V and has a battery backup. Unlike the DS1307, the DS3231 also has an integrated crystal...
 2
Out of stock
Arduino

Seeed Studio WiFi shield for Arduino (Arduino...

iTeadStudio
ASHSESWLS06201P
45,00 €
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Seeeduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield. It features an independent antenna which can cover a wider range and transmit stronger signals. With supports for common TCP, UDP and FTP...
 2
Out of stock
Connectivité sans fil

BTBee Pro

iTeadStudio
WIRITEBTBEEPRO
19,38 €
BTBee Pro is a serial port Bluetooth module which can be compatible with the shields which with XBee sockets. It's designed for Bluetooth wireless transfer. It supports Slave and Master mode, can be plugged into XBee socket and using the UART for transparent transmission. This module supports Bluetooth Wireless Program as well.
 2
Out of stock
Electronique

433Mhz Wireless Serial Transceiver Module - 40...

iTeadStudio
SEDSERTRAN40M
10,00 €
Serial transceiver module is a low cost, high performance transparent FSK transceiver with operating at 434 MHz. It features small size, high output power, high sensitivity, long transmission distance and high communication data rate with auto set up for communication change and data receiving and transmission control.
 2
Out of stock
Outils de dev.

Platine 3G (réseau mobile WCDMA) iTead pour...

iTeadStudio
ASHITE3G
62,50 €
Cette platine 3G vous permet d'échanger des données en utilisant les réseaux mobiles (comme celui de votre téléphone portable) tout en gardant une consommation électrique faible. Il est contrôlé directement depuis votre carte arduino en utilisant des commandes AT standard.
 2
  • Prix réduit / -6,00 €
Available
Electronique

Module accéléromètre ADXL345 Triple-Axis

iTeadStudio
SENITEADXL345
4,00 € 10,00 €
L'ADXL345 est un accéléromètre 3 axes consommant peu d'énergie, sortant des signaux de voltage conditionnés tout en gardant une taille très réduite. Son prix très bas vous permettra de l'inclure dans tous vos montages sans y réfléchir à deux fois.
 2
Available
Accueil

ITeaduino Tiny

iTeadStudio
MCBITDTINY
7,50 €
Iteaduino Tiny is a mini development board based on Attiny85 master, which is cheap, compact and easy to use with low power consumption. The mainboard is a derivative board with reference to digispark design, and it supports use of specific Arduino IDE and uses Arduino syntax for programming which is quite convenient.
 2
Product available with different options
Arduino

ITeaduino Nano USB Microcontroller

iTeadStudio
MCB00002C
The Iteaduino Nano is a small, complete, and breadboard-friendly board based on the Adruino Nano 3.0. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Micro USB cable instead of a standard one.
Available
Electronique

Battery Charging StepUp Power Supply Module...

iTeadStudio
POWSEDLITCHM
3,25 €
The module is used for charging of single lithium battery or multiple lithium batteries in parallel, and the charging port can take power from the USB port. output USB micro usb input / usb output / and charging lipo
 2
Available
Electronique

IIC EEPROM and RTC Module DS1307 atmel832

iTeadStudio
SENSEDIICRTCEEPROM
4,38 €
With compact design, the board can integrate the real-time clock module DS1307, EEPROM memory AT24C32 and digital temperature sensor DS18B20 (not supplied on the board) which are connected via I2C bus together on a 27mm*28mm*8.4mm board.
 2
Available
Accueil

Dual stepper motor shield

iTeadStudio
ASHITEDUASTE
11,58 €
Dual stepper motor driver shield can drive 2 stepper motors at the same time by Arduino. It can work with the power supply from 4.75V to 30V. High accuracy controlling can be supported by Arduino for CNC milling machine.
 2
  • Prix réduit / -2,00 €
Available
Affichage

Graphic LCD 128*64 (White on Blue) (screen)

iTeadStudio
LCDITE12864WB
14,00 € 16,00 €
This is a framed graphical LCD 64x128 with yellow or blue black-light . This unit is a very clear STN type LCD with a simple command interface.
 2
Available
Electronique

GY-61 Module accéléromètre low-cost ADXL335...

iTeadStudio
SENITEADXL335
8,00 €
L'ADXL335 est un accéléromètre 3 axes consommant peu d'énergie, sortant des signaux de voltage conditionnés tout en gardant une taille très réduite. Son prix très bas vous permettra de l'inclure dans tous vos montages sans y réfléchir à deux fois.
  • Prix réduit / -2,00 €
Available
Electronique

ULN2003 Stepper Motor Driver Board

iTeadStudio
MDRULN2003
2,58 € 4,58 €
ULN2003 Stepper Motor Driver Board is use the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motors (5v-12v).
 2
  • Prix réduit / -3,11 €
Available
Affichage

Nokia 5110 LCD (screen)

iTeadStudio
LCDNOK5110
6,00 € 9,11 €
Nokia 5110 LCD is a low-cost 84*48 pixels graphic LCD. It uses the PCD8544 controller. The PCD8544 interfaces to microcontrollers through a serial bus interface (5-wires).
 2
Available
Outils de dev.

433Mhz RF link kit

iTeadStudio
WIRITE433LINK
3,92 €
The 433M RF link kit is consisted of transmitter and receiver, popular used for remote control. 433MHz frequency and ASK modulation.
 2
Available
Electronique

Freescale MMA7361L Accelerometer breakout...

iTeadStudio
SENITEMMA7361L
9,00 €
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and...
 2
  • Prix réduit / -5,50 €
Available
Outils de dev.

nRF24L01+ with PA and LNA 2.4Ghz RF module...

iTeadStudio
WIRITENRF24L01PALNA
6,50 € 12,00 €
This is a long distance 2.4G wireless module which basic on nRF24L01+ chip, and there is the PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
Available
Outils de dev.

nRF24L01+ 2.4Ghz RF module (improved range)

iTeadStudio
WIRITENRF24L01
4,00 €
This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+.This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401+ and add some extra pipelines, buffers, and an auto-retransmit feature.
 2
Available
Affichage

Serial Graphic LCD 128*64 (ST7565/67 ctrl) -...

iTeadStudio
LCDITEDIS008
19,15 €
Very high quality serial lcd with backlight, to add a graphic display to your project in minutes, without the need of much IO lines with fast refresh rate.
 2
Available
Outils de dev.

PL2303 USB to UART (TTL) breakout

iTeadStudio
USBITEPL23035V
4,08 €
It's a small USB to TTL serial tool, using the PL2303 chip. You can use it to connect some serial device to your PC via USB port, an avr, an msp430 or an stm32 for example. It's very cheap compared to the ft232 alternative and works very well, up to more than 1mbit/s.
 2
  • Prix réduit / -5,10 €
Available
Prototypage

16x2 LCD Keypad shield for Arduino (Arduino...

iTeadStudio
ASH00003
7,40 € 12,50 €
This very popular LCD Keypad shield can be directly plug on an Arduino board, no soldering or fly-wiring needed.
 2
  • Prix réduit / -8,10 €
Available
Outils de dev.

Iteaduino BT HC-05 (Arduino-compatible with...

iTeadStudio
MCB00001
23,57 € 31,67 €
Iteaduino-BT is an Arduino compatible board with a master/slave Bluetooth Module HC-05. It based on Arduino Duemilanove, 100% compatible to its existing program, shield and IDE. On the hardware part, remarkable changes are taken to improve the flexibility and user experience.
 2
  • Prix réduit / -2,00 €
Available
Cartes additionnelles (carte filles ou shields)

ProtoScrewShield for Arduino (Arduino Compatible)

iTeadStudio
ASH00001
8,00 € 10,00 €
Your project uses external peripherals and needs them connected securely ? Don't look twice, and take that shield. You can add components on it as it has a 0.1" spaced through hole for standard dip components as well as stackable headers and screw headers.
Product added to wishlist
Product added to compare.