Your cartIl n'y a plus d'articles dans votre panier
Mini Solar/Lipo Charger Board
In our application, especially in some outdoor applications, we often need to use the lithium battery, lithium battery charging problem is a need to solve the problem, we designed this mini lithium battery charging board.
Board size is very small , It can use external power supply, such as solar or USB power supply. It uses CN3065 - a single lithium battery charge management chip, when an external power supply to the lithium ba
- Maximum 1A load output
- Battery and Solar panel connector is JST 2.0
- Stable 5V USB power supply regardless of source
- Charge/Recharge algorithms built into chip
- Charge Lithium Polymer Battery through solar power or USB
- Stable supply voltage through either lithium battery or USB
- USB ports let you program your kit while charging your Lithium battery
- LED indications for battery full or charging states :One red alarm LED and one green status LED
- Input voltage: 4.4V-6V
- Output voltage / current: 5V 500mA
- Operating temperature: -40 ℃ -80 ℃
- Mini Solar/Lipo Charger Board x1
Les clients qui ont acheté ce produit ont également acheté...
Câble HDMI DIY: 0.5m FFC 20PIN 0.5Pitch 0.5m
Cet adaptateur vous permet d'avoir tous les pin du raspberry pi disponible directement sur votre breadboard (et alimenter celle-ci au passage).
This is a digital temperature sensor, that is already calibrated. The measurement is done where the sensor is, no need for long insulated wire or complicated ADC design. This sensor is therefore also perfect for use with a Raspberry Pi, as it is not analogic, all the data is transmitted in digital One Wire protocol.
A nice set of heat shrinkable sleeves for all your cable assemblies.
Convertisseurs DC/DC "Step-Down"
This is a simple to use voltage régulator that outputs 3.3V at 0.15A
This small yet powerful DC 9V 1A power module provides all your projects an easy to use power supply.
You can simply plug this USB Wifi dongle into the USB port of your Dev Board and you're ready to connect to a nearby wireless network with extra power thanks to its antenna.
If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. This logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works with 2.8V and 1.8V devices. Each level converter has the capability of converting 4 pins on the high side to 4...
This is a simple male header, very useful for a lot of things, including to plug boards like the arduino on your protoboards.
This is a simple adapter from an usb port to a barrel jack connector, very useful for Arduino and other mcu board with a barrel jack adapter.