- Rupture de stock
M5Stack Fire Dev Kit (ESP32 dev module, 4mb psRam, Wifi, Bluetooth 4, LCD, Battery, etc.)
65,00 €
TTC
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a bigger battery, a charging host an usb type c cable and connecting bars. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need.
With the protoboards (not included) and upcoming modules you can add any features you need as shields.
Oh, did I mention you can program it using the Arduino IDE, PlatformIO, Micropython and others ?
The M5Stack FIRE is a development kit based on ESP32 chip. FIRE is a kit which composed of red m5core, M5Go Base and M5Go CHG. Base(for charging red m5core). You can even program The M5Stack FIRE through Blockly, Arduino or MicroPython.
The M5Stack FIRE equips the ESP32 with everything necessary to program, run and develop on the wonderchip. It also features a 9-Axis (Gyro + Accelerometer + Magnetometer) MEMS (MPU-9250) and a TFT LCD, so you can create a 3D remote gesture controller, a simple “Leap Motion” via M5Stack FIRE in a day in stead of couple weeks and so on.
M5Go CHG. Base is composed of POGO pin. M5Go Base is composed of PORT B, PORT C, 2 RGBLed Bars(SK6812), a microphone and a Battery(600mAh).
FEATURES
- Programming Support
- UiFlow
- MicroPython
- Arduino
- Compatible LEGO
- TF Card Support
PARAMETER
| Source | Parameter |
|---|---|
| ESP32 | 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth |
| Flash | 16MB Flash + 4MB pSRAM |
| Input | 5V @ 500mA |
| Interface | TypeC x 1, GROVE(I2C+I/0+UART) x 1 |
| LCD | 2 inch, 320x240 Colorful TFT LCD, ILI9342 |
| Speaker | 1W-0928 |
| Microphone | MEMS Analog BSE3729 Microphone |
| LED | SK6812 3535 RGB LED x 10 |
| MEMS | MPU9250 (MPU6500 + AK8963) |
| Battery | 550mAh @ 3.7V, inside vb |
| Op.Temp. | 32°F to 104°F ( 0°C to 40°C ) |
| Size | 54 x 54 x 12.5 mm |
| C.A.S.E | Plastic ( PC ) |
| Weight | 56g |
PinMap
POGO Pin
| POGO Pin | ESP32 Chip |
|---|---|
| SCL | GPIO22 |
| SDA | GPIO21 |
LED Bar
| LED Pin | ESP32 Chip |
|---|---|
| LED Pin | GPIO15 |
MIC
| MIC Pin | ESP32 Chip |
|---|---|
| MIC Pin | GPIO34 |
Speak
| Speak Pin | ESP32 Chip |
|---|---|
| Speak Pin | GPIO25 |
Button
| Button Pin | ESP32 Chip |
|---|---|
| BUTTON A | GPIO39 |
| BUTTON B | GPIO38 |
| BUTTON C | GPIO37 |
GROVE
| PORT A(I2C) | ESP32 Chip |
|---|---|
| SCL | GPIO22 |
| SDA | GPIO21 |
| 5V | 5V |
| GND | GND |
| PORT B(I/O) | ESP32 Chip |
|---|---|
| G36 | GPIO36 |
| G26 | GPIO26 |
| 5V | 5V |
| GND | GND |
| PORT C(UART2) | ESP32 Chip |
|---|---|
| RXD | GPIO16 |
| TXD | GPIO17 |
| 5V | 5V |
| GND | GND |
MEMS Chip
MPU9250 i2c address: 0x68
| MPU9250 | ESP32 Chip |
|---|---|
| SCL | GPIO22 |
| SDA | GPIO21 |
| 5V | 5V |
| GND | GND |
LCD
| ILI9341 | ESP32 Chip |
|---|---|
| MOSI | GPIO23 |
| MISO | / |
| CLK | GPIO18 |
| CS | GPIO14 |
| DC | GPIO27 |
| RST | GPIO33 |
| BL | GPIO32 |
TF Card
| TFCard Pin | ESP32 Chip |
|---|---|
| MOSI | GPIO23 |
| MISO | GPIO19 |
| CLK | GPIO18 |
| CS | GPIO4 |
M-Bus
INCLUDES
- 1x M5Stack FIRE
- 1x M5GO Base
- 1x M5GO CHG BASE
- Type-C USB Cable
- User Manual
DOCUMENTS
-
Example
-
Register map - MPU9250
-
Quick Start
- Arduino - MacOS - Windows_64
- MicroPython
MCBM5FDEVKIT
Nouveau
Vous aimerez aussi
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a bigger battery, a charging host an usb type c cable and connecting bars. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need.
With the protoboards (not included) and upcoming modules you can add any features you need as shields.
Oh, did I mention you can program it using the Arduino IDE, PlatformIO, Micropython and others ?