- Motorisé
- Outils
-
Outils de dev.
-
Electronique
-
Puissance et Energie
- Connecteurs et Fils
- Grove
- Périphériques USB
- Moteur et servo-moteurs
- LEDs & Lampes
- Assembly kits
- Domotique
- Break-out Boards
- Réseau
- Bases de l'électronique
- Circuits imprimés (PCB)
- Son
- Circuits intégrés (Chips, puces, ICs)
- Connectivité sans fil
- Senseurs
- Interface Homme-Machine
- CMS / SMD
- Autres
-
Puissance et Energie
- Prototypage
0.96inch LCD Display Module, IPS Screen, 65K RGB Colors, 160x80 Resolution, SPI Interface
-
-
-
LCD & Controller
The built-in controller used in this LCD is ST7735S, which is an LCD controller with 162 x RGB x 132 pixels, while the pixels of this LCD are 160 (H) RGB x 80 (V).
Looking over the datasheet, you can see that the controller supports 12-bit, 16-bit, and 18-bit input color formats per pixel, namely RGB444, RGB565, and RGB666 three color formats, this screen uses RGB565 format color format, which is also commonly used RGB Format.
Since the display starting position of the LCD is inconsistent with the origin of the controller, it is necessary to perform offset processing when using the controller to initialize the full-screen display area: the display starts from the second pixel in the horizontal direction, and the 27th pixel in the vertical direction.
-
-
-
VCC Power (3.3V/5V input) GND Ground DIN SPI data input CLK SPI clock input CS Chip selection, low active DC Data/Command selection (high for data, low for command) RST Reset, low active BL Backlight
Vous aimerez aussi