RN-XV Wifly Bee (RN-171 XV, Wire antenna)

The RN-171-XV is a 802.11 b/g solution especially designed for designers who want to migrate their existing 802.15.4 architecture to a more standard TCP/IP-based platform without redesigning their existing hardware.
Based on a pseudo standard footprint often found in embedded applications, the Roving Networks’ RN-171-XV module provides Wi-Fi connectivity using 802.11 b/g standards in legacy and existing designs that may have been based upon the 802.15.4 standard.
En rupture de stock
42,00 € 35,00 €

Tous nos produits sont livrés depuis Paris.

Un doute sur votre achat ? Retournez-nous le produit sous 7 jours et nous vous remboursons.

Nous choisissons et testons minutieusement les produits que nous vendons pour vous proposer uniquement le meilleur.

On connait nos produits, donc si vous avez une question n'hésitez-pas !
Appelez-nous au +33 (0) 1 43 73 15 54 ou au +33 (0) 1 46 59 17 37

The RN-171-XV module is based on Roving Networks' robust RN-171 Wi-Fi module and incorporates an 802.11 b/g radio, a 32-bit SPARC processor, a TCP/IP stack, a real-time clock, a crypto accelerator, power management unit, and an analog sensor interface.

The module offers additional functionality through its on- board programmable GPIO pins (10) and ADCs (8). The ADCs provide 14-bit resolution while the GPIOs can be configured to provide standard functionality or status signaling to a host microcontroller, reducing the need for serial polling between the Wi-Fi module and host microcontroller.

The module is pre-loaded with firmware to simplify integration and minimize applications development time. In the simplest configuration, the hardware only requires four connections (PWR, TX, RX, and GND) to create a wireless data connection.

• Drop-in Wi-Fi solution for existing systems that currently use 802.15.4 modules
• Based on Roving Networks’ robust RN-171 Wi-Fi module
• Based on a pseudo-standard footprint
• On-board TCP/IP stack provides Internet access to every node
• No custom profiles needed
• Ultra-low power: 4-uA sleep, 40-mA Rx, 180-mA Tx at 10 dBm
• Configurable transmit power: 0 to +12 dBm
• Hardware interface: TTL UART
• Data rate: 464 Kbps using hardware flow control
• Through-hole board simplifies system integration
• 8 general purpose digital I/O pins
• 3 analog sensor interfaces
• Real-time clock for wakeup and time stamping
• Complete TCP/IP networking stack
• Wi-Fi Alliance certified for WEP, WPA, and WPA2-PSK
• WPS mode for easy configuration
• FCC/CE/ICS certified and RoHS compliant

• Industrial metering
• HVAC control
• Room temperature sensors
• Pump configuration and control
• Telemetry
• PV/solar controllers
• Robotics



More information

Plus d’information
Compatibilité avec les cartes Arduino clones, Arduino Duemilanove, Arduino mega, Arduino Pro, Arduino Uno, iTeaduino mega, MSP430 Launchpad, Seeeduino mega, STM32 Discovery, STM32F4 Discovery
Fabricant Microchip
Couleur Rouge
Voltage 3.3v
Connectivité 802.11b (wifi), 802.11g (wifi)
Package Non
Mémoire Flash (programme) Non
Tension en entrée 3v min, 3.3v typical, 3.6v maximum
Fréquence Radio 2.4Ghz
Rédigez votre propre commentaire
Vous commentez :RN-XV Wifly Bee (RN-171 XV, Wire antenna)
Votre évaluation
Nous avons trouvé d’autres produits qui pourraient vous intéresser !