M5Stack BALA (Kit robotique ESP32 à auto-équilibrage, PSRAM, MPU9250, Wifi, BLE, briques de construction)

MCBM5FDEVBALA
Rupture de stock
103,75 €

The M5Stack BALA is a balance bot based on M5Stack FIRE, including a 2 DC driver module based on Mega328p which is the core chip used on the Arduino UNO.

You can even program The M5Stack BALA through Arduino or MicroPython with a few lines of code (or even visually with the web editor!).

The 2 DC driver module communicates with M5Stack FIRE through I2C bus. It’s default I2C address is 0x56.

Vous aimerez aussi

Nos engagements
  1. Tous nos produits sont livrés depuis Paris.
  2. Un doute sur votre achat ? Retournez-nous le produit sous 7 jours et nous vous remboursons.
  3. Nous choisissons et testons minutieusement les produits que nous vendons pour vous proposer uniquement le meilleur.

FEATURES

  • Programming Support
    • Python
  • Compatible LEGO
  • POGO Pin
  • TF Card Support

PARAMETER

ModelM5Stack FIRE
ESP32 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth
Flash 16MB Flash + 4MB pSRAM
Input 5V @ 500mA
Interface TypeC x 1, GROVE(I2C+I/0+UART), Pogo Pin x 1
LCD 2 inch, 320x240 Colorful TFT LCD, ILI9342
Speaker 1W-0928
Microphone MEMS Analog BSE3729 Microphone
LED SK6812 3535 RGB LED x 10
MEMS MPU9250 (MPU6500 + AK8963)
Battery 550mAh @ 3.7V, inside
Op.Temp. 32°F to 104°F ( 0°C to 40°C )
Size 54 x 54 x 21 mm
C.A.S.E Plastic ( PC )
Weight 56g

INCLUDES

  • 1x M5Stack BALA
  • 1x Motor Driver
  • 2x N20(Encoder included)
  • Type-C USB Cable

DOCUMENTS

Nouveau produit
No reviews

Les clients qui ont acheté ce produit ont également acheté...

Available
LEDs & Lampes

5mm Blue Led

LED5MMBLU
0,10 €
5MM Round Blue Led Indicator Light-emitting Diode Lamp
2
Available
Raspberry Pi

Raspberry Pi 3 Modèle B+ (BCM2837B0, Cortex...

LINRPI3B+
41,58 €
Raspberry Pi 3 Model B+ 1GB RAM The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi3 range, boasting a 64-Bit quad core processor running at 1.4GHz, dual band 2.4GHz / 5.0GHz wireless, Bluetooth 4.2/BLE, faster Ethernet and PoE capability via a separate PoE HAT. The dual band wireless comes with modular compliance certification...
2
  • Prix réduit / -2,00 €
Available
Electronique

Dual female splittable jumper wires (300mm, 40...

CONSEDJMP40PFF
3,00 € 5,00 €
This is a splittable 40 pin dual female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
2
Out of stock
Electronique

male female splittable jumper wires (300mm, 40...

CONSEDJMP40PMF
5,00 €
This is a splittable 40 pin male-female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
View
Available
Electronique

5mm Green Led

LEDKIN5MMGRE
0,10 €
Simple 5mm green led with 20mcd power.
2
Out of stock
Robots

POLOLU Kit micro pince avec servo retour de...

ROBPOLGRIPKIT
18,33 €
This small gripper uses a rack and pinion design with a servo-driven pinion and opposing racks to keep the gripper paddles synchronized and parallel to each other throughout its 32 mm range of motion. It includes a special micro servo with an additional wire that gives access to its feedback potentiometer, so you can track the actual position of the...
View
2
  • Prix réduit / -10,60 €
Available
Outils de dev.

M5Stack ESP32CAM Camera Module, ESP32 + OV2640

SENM5SCAM
10,23 € 20,83 €
Description Description The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core. The ESP32CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. It also features a LiPo charger (IP5306) , so your ESP32CAM project can be...
Product added to wishlist
Product added to compare.