-19.23%

8x5 WS2812 RGB Led Matrix Shield with integrated electronics for Arduino (Neopixel compatible)

aucun
Put on your sunglasses before putting this shield onto your 'duino - 40 eye-blistering RGB LEDs adorn the panel for a blast of configurable color. Arranged in a 5x8 matrix, each pixel is individually addressable. Only one pin is required to control all the LEDs. You can cut a trace and use nearly any other pin if you need some customization.
En stock
SKU
LMARGB8X5WS2812
Prix Spécial 25,20 € 21,00 € Prix normal 31,20 €

Tous nos produits sont livrés depuis Paris.

Un doute sur votre achat ? Retournez-nous le produit sous 7 jours et nous vous remboursons.

Nous choisissons et testons minutieusement les produits que nous vendons pour vous proposer uniquement le meilleur.

On connait nos produits, donc si vous avez une question n'hésitez-pas !
Appelez-nous au +33 (0) 1 43 73 15 54 ou au +33 (0) 1 46 59 17 37

To make it easy to start, the LEDs are powered from the 5v onboard Arduino supply. As long as you aren't lighting up all the pixels full power white that should be fine. You can also solder in the included terminal block (pro-tip: put it on the bottom of the board so it doesn't stick up) to attach an external 4-6VDC power supply.

If, say, you need MORE blinky, you can chain these together. For the second shield, connect the DIN connection to the first shield's DOUT. Also connect a ground pin together and power with 5V. There you go! You can chain as many as you'd like although after 5 or more shields you may run low on RAM if you're using an UNO.
Plus d’information
Fabricant Non
Compatibilité avec les cartes Non
Micro-controlleur(s) Non
Famille de micro-controlleur Non
Type de CPU Non
Vitesse d'horloge Non
Mémoire Flash (programme) Non
Mémoire RAM (vive) Non
Couleur Non
Connectivité Non
Tension en entrée Non
Courant Non
Voltage Non
Watts (entrée) Non
Watts (sortie) Non
Fréquence Radio Non
Rédigez votre propre commentaire
Vous commentez :8x5 WS2812 RGB Led Matrix Shield with integrated electronics for Arduino (Neopixel compatible)
Votre évaluation