This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Seeeduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield. It features an independent antenna which can cover a wider range and transmit stronger signals. With supports for common TCP, UDP and FTP...
DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated
temperature-compensated crystal oscillator (TCXO) and crystal. Compared to the DS1302 solution, the DS3231 has many advantages, it function with a VCC ranging from 2.3V to 5.5V and has a battery backup. Unlike the DS1307, the DS3231 also has an integrated crystal...
Your project uses external peripherals and needs them connected securely ? Don't look twice, and take that shield. You can add components on it as it has a 0.1" spaced through hole for standard dip components as well as stackable headers and screw headers.
Cette platine 3G vous permet d'échanger des données en utilisant les réseaux mobiles (comme celui de votre téléphone portable) tout en gardant une consommation électrique faible. Il est contrôlé directement depuis votre carte arduino en utilisant des commandes AT standard.
It's a small USB to TTL serial tool, using the PL2303 chip.
You can use it to connect some serial device to your PC via USB port, an avr, an msp430 or an stm32 for example.
It's very cheap compared to the ft232 alternative and works very well, up to more than 1mbit/s.
This is a long distance 2.4G wireless module which basic on nRF24L01+ chip, and there is the PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+.This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401+ and add some extra pipelines, buffers, and an auto-retransmit feature.
Non Blind Zone Ultrasonic Module SDM-IO is a stable and measure the distance accurately ultrasonic module which provides 0cm - 1500mm non-contact measurement function,the ranging accuracy can reach to 3mm. Its performance can compare with SRF05/SRF02 ultrasonic distance measuring module, also it has non-blind design and fast response.
The iTead Music Player Shield is based on CECL08D. The CECL08D chip can be used to decode MP3/WAV format audio file. The music player shield has SD card socket and USB interface, supporting USB and SD card play. Just plug and play!
L'ADXL345 est un accéléromètre 3 axes consommant peu d'énergie, sortant des signaux de voltage conditionnés tout en gardant une taille très réduite. Son prix très bas vous permettra de l'inclure dans tous vos montages sans y réfléchir à deux fois.
Iteaduino Tiny is a mini development board based on Attiny85 master, which is cheap, compact and easy to use with low power consumption. The mainboard is a derivative board with reference to digispark design, and it supports use of specific Arduino IDE and uses Arduino syntax for programming which is quite convenient.
Iteaduino Plus is an open source ARM development board, which is based on Allwinner A20 SoC, small size, hacker friendly, extendable and very low-cost. Compare with Raspberry Pi, it has higher performance, SATA supported and more extension interfaces.
The Iteaduino Nano is a small, complete, and breadboard-friendly board based on the Adruino Nano 3.0. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Micro USB cable instead of a standard one.
Iteaduino-BT is an Arduino compatible board with a master/slave Bluetooth Module HC-05. It based on Arduino Duemilanove, 100% compatible to its existing program, shield and IDE. On the hardware part, remarkable changes are taken to improve the flexibility and user experience.
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Iteaduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield.
With compact design, the board can integrate the real-time clock module DS1307, EEPROM memory AT24C32 and digital temperature sensor DS18B20 (not supplied on the board) which are connected via I2C bus together on a 27mm*28mm*8.4mm board.
The Iboard Pro is a unique Arduino board which features a WIZnet Ethernet port with POE, an XBee socket, ITDB02 Serial/Parallel LCD module interface, RTC, nRF24L01+ module interface, Micro SD socket and an ATMega2560. This board will add wireless XBee control as well as internet connectivity to your projects. It’s great for anything from home automation...
Iboard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, nRF24L01+ module interface and an ATMega328. This board will add wireless XBee / nRF24L01+ control as well as internet connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless! Iboard can be used as an...
L'ADXL335 est un accéléromètre 3 axes consommant peu d'énergie, sortant des signaux de voltage conditionnés tout en gardant une taille très réduite. Son prix très bas vous permettra de l'inclure dans tous vos montages sans y réfléchir à deux fois.