Linux

 2
Out of stock
Outils de dev.

Radxa Rock Pro - Mini carte ARM Quad Core...

LINRADXAROCKPRO
107,50 €
Radxa’s new product for single-board computers. The CPU is ARM Cortex-A9 processor running from 324Mhz to 1.6Ghz, and can balancing between performance and power saving. It integrate with full interfaces, all ways to connect like Wifi, Bluetooth, HDMI, USB, Spdif, MIC and TF Card.   As a barebones single-board computer, the key feature for 80 pins 2.54mm...
 2
Available
Outils de dev.

Seeeduino Cloud - Compatible Arduino Yun (Carte...

MCBSEDCLOUD
55,00 €
Seeeduino Cloud is a microcontroller board based on Dragino WiFi IoT module HE and ATmega32u4. HE is a high performance, low cost 150M, 2.4G WiFi module which means “core” in Chinese and with an Open Source OpenWrt system inside. Seeeduino Cloud is also an Arduino compatible board, 100% compatible to grove, shield and IDEs(>=1.5.3). Except for the...
Available
Raspberry Pi

Boîtier pour Raspberry Pi 2/3 B + Noir

CASRPI2BLK
6,25 €
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together. The enclosure...
 2
Product available with different options
Raspberry Pi

RaspberryPi 2 Modèle B (Raspberry Pi Quad-core...

LINRPI2B
Raspberry Pi 2 Modèle B représente une grande amélioration des performances par rapport à ses prédécesseurs à cœur simple : jusqu'à six fois plus rapide, en fait. En plus d'un nouveau processeur quatre cœurs Cortex-A7, le Raspberry Pi 2 Modèle B offre maintenant 1 Go de mémoire RAM. Le noyau du système d'exploitation a été mis à niveau pour profiter au...
 2
Out of stock
Outils de dev.

Intel GalileoV2 Arduino Developement Board...

Arduino
MCBARDGALI
62,50 €
Galileo V2 is a microcontroller board based on the Intel® Quark SoC X1000 Application Processor, a 32-bit Intel Pentium-class system on a chip (datasheet). It’s the first board based on Intel architecture designed to be hardware and software pin-compatible with Arduino shields designed for the Uno R3. Digital pins 0 to 13 (and the adjacent AREF and GND...
 2
Product available with different options
Outils de dev.

NanoPi M1 (Quad Core A7 ARM, 512M RAM)

LINNANPIM1
Quite nice little ARM quad-core board at a very low price. It even features an ethernet port, three USBs, an infrared receiver and an HDMI port.
 2
Out of stock
Cartes officielles

Arduino Yún (Arduino, Linux and WiFi in one...

Arduino
MCBARDYUN
60,00 €
The Arduino Yún is a microcontroller board based on the ATmega32u4 (datasheet) and the Atheros AR9331. The Atheros processor supports a Linux distribution based on OpenWRT named Linino. The board has built-in Ethernet and WiFi support, a USB-A port, micro-SD card slot, 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog...
 2
Available
Outils de dev.

BeagleBone Black (Rev. C)

LINBEAGLEBONEBLK
55,83 €
BeagleBone Black is the newest member of the BeagleBoard family and is a lower-cost, high-expansion focused BeagleBone, featuring the Sitara AM3359 ARM Cortex-A8 32-Bit RISC microprocessor from Texas Instruments. It is similar to the BeagleBone but with some previous features removed to make way for the excellent new features.
  • Prix réduit / -3,20 €
Available
Outils de dev.

T Board for pcDuino

PCBPCDTBOARD
7,80 € 11,00 €
T Board to Bridge Arduino Shield to pcDuino with Level Shifter
 2
  • Prix réduit / -10,00 €
Out of stock
Outils de dev.

Cubieboard 2 standard kit (ARM Linux board,...

LINCUB2BRDSTD
56,67 € 66,67 €
Cubieboard2 is a upgrade of the cubieboard, which is based on Allwinner A20 SoC, small size (10cmx6cm), hacker friendly, extendable and very low-cost. Compare with Raspberry Pi, it has higher performance, SATA supported and 96 extended interface.
 2
  • Prix réduit / -20,00 €
Available
Outils de dev.

Iteaduino Plus A20 (ARM Linux board, Dual-core...

iTeadStudio
LINAA20ITEA
55,00 € 75,00 €
Iteaduino Plus is an open source ARM development board, which is based on Allwinner A20 SoC, small size, hacker friendly, extendable and very low-cost. Compare with Raspberry Pi, it has higher performance, SATA supported and more extension interfaces.
 2
Available
Prototypage

Platine de prototypage pour Cubieboard Proto...

PCBCUBPRO
11,25 €
Cette platine de prototypage pour Cubie Boarrd et Cubie Board 2 vous permettra d'utiliser les composants et connecteurs standards en 2.54mm dans vos projets ainsi que de disposer d'une sortie VGA.
 2
  • Prix réduit / -30,00 €
Available
Outils de dev.

MarS Board is a Multi-Core i.MX6 Cortex-A9 Dual...

LINMB2BRDSTD
61,67 € 91,67 €
Cubieboard2 is a upgrade of the cubieboard, which is based on Allwinner A20 SoC, small size (10cmx6cm), hacker friendly, extendable and very low-cost. Compare with Raspberry Pi, it has higher performance, SATA supported and 96 extended interface.
 2
Product available with different options
NanoPi

NanoPi M3 (Octa Core Cortex A53 1.4GHz, 1GB...

LINNANPIM3
The NanoPi M3 is another ARM board developed by FriendlyARM for makers, hobbyists and hackers. With this new friend we wish you could get not only tech skills but also unique experiences in various applications and hacking. It is small, elegant but has rich ports and interfaces. Playing with it and working with it the M3 will not only inspire your ideas...
 2
Product available with different options
Cartes RaspberryPi

RaspberryPi modèle B+ (Raspberry Pi type B+)

LINRASPBERRYBPLUS
Le Raspberry Pi modèle B+ est une carte d'ordinateur de la taille d'une carte de crédit qui est prête à être utilisée dès qu'un clavier, une souris, un écran, une alimentation et une carte SD avec système exploitation installé sont ajoutés. Il s'agit d'un ordinateur de bureau basé sur ARM miniature qui peut effectuer un grand nombre des applications...
 2
Product available with different options
Prototypage

RaspberryPi modèle A+ (Raspberry Pi type A+)

LINRASPBERRYAPLUS
Raspberry Pi est une carte d'ordinateur de la taille d'une carte de crédit, prête à l'emploi dès qu'un clavier, une souris, un écran, une alimentation et une carte MicroSD avec système exploitation installé sont ajoutés. Il s'agit d'un ordinateur de bureau basé sur ARM miniature qui peut effectuer un grand nombre des applications nécessitant...
 2
  • Prix réduit / -3,25 €
Out of stock
Outils de dev.

BeagleBone Green (Seeed Studio version)

Seeed Studio
LINSEDBBGRN
46,75 € 50,00 €
SeeedStudio BeagleBone Green (BBG) is a joint effort by BeagleBoard.org and Seeed Studio. It is based on the open-source hardware design of BeagleBone Black and developed into this differentiated version. The BBG has included two Grove connectors, making it easier to connect to the large family of Grove sensors. It has also updated the 5V barrel to micro...
  • Prix réduit / -7,50 €
Available
Accueil

pcDuino Lite (Cortex A8 1Ghz, Linux...

LINPCDLITE
30,00 € 37,50 €
pcDuino Lite is a high performance, cost effective mini PC platform that runs PC like OS such as Ubuntu. It outputs its screen to HDMI enabled TV or monitor via the built in HDMI interface. It is specially targeted for the fast growing demands from the open source community. The platform could run full blown PC like OS with easy to use tool chain and...
 2
Product available with different options
Outils de dev.

NanoPi M1 (Quad Core A7 ARM, 1GB RAM)

LINNANPIM11GB
Quite nice little ARM quad-core board at a very low price. It even features an ethernet port, three USBs, an infrared receiver and an HDMI port.
Product added to wishlist
Product added to compare.