Gaz / Volatile

 2
Available
Electronique

8128 CCS811 + HDC1080 + BMP280 Gaz Température...

SENJAN8128
15,00 €
CCS811 + HDC1080 + BMP280 faible puissance Gaz Température et Humidité Hauteur Trois-en-un Capteur Module de surveillance la qualité de L'air intérieur
 2
Available
Accueil

Analog CO / Combustible Gas Sensor (MQ9)

SENJANCOGAS
4,50 €
The Analog CO/Combustible Gas Sensor(MQ9) module is useful for gas leakage detecting, it used the sensitive material SnO2, which with lower conductivity in clean air. It make detection by method of cycle high and low temperature, and detect CO when low temperature (heated by 1.5V). The sensors conductivity is more higher along with the gas concentration...
 2
  • Prix réduit / -18,00 €
Available
Electronique

Capteur de particules fines Nova SDS011 (PM2.5...

SENNOVSDS011
22,00 € 40,00 €
With its size, it is probably one of the best sensor in terms of accuracy, especially considering it has an output in μg/m3 directly.  if you want to use it on a raspberry pi or on a computer, but you can always use the digital or uart output directly.
 2
  • Prix réduit / -22,00 €
Available
Electronique

CJMCU-524 MICS-5524 Gas Carbon monoxide Natural...

SENSGX5524BKT
17,17 € 39,17 €
Give your next sensor project a nose for gasses with the MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout Board. This breakout makes it easy to use this nice sensor from SGX Sensortech. The MICS-5524 is a robust MEMS sensor for indoor carbon monoxide and natural gas leakage detection, it's suitable also for indoor air quality monitoring, breath checker...
 2
  • Prix réduit / -5,00 €
Available
Senseurs

Détecteur de fumée, Smoke sensor (with relay...

SENSMOKRELAY
9,17 € 14,17 €
Détecteur de fumée with relay output. You only get HIGH or LOW, you can also use it to get some higher current in your circuit when the sensor is activated.
 2
Available
Accueil

DEW Sensor - HDS05

ECRSES05002S
2,71 €
High-humidity sensor, usefull for weather appliances.
 2
Available
Electronique

DHT-11 Temperature & Humidity Sensor

SENDHT11
2,50 €
This sensor provides temperature and humidity data with a quite good sensibility in a serial format thanks to its built-in micro-controller.
 2
Available
Accueil

DHT-12 Humidity Temperature Sensor

SENDHT12
3,00 €
This is upgradation version of DHT-11 humidity temperature sensor, fully downward compatible, more precise and add I2C interface.
 2
Available
Senseurs

DHT-22 Temperature & Humidity Sensor

SENDHT22
11,00 €
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn't require extra components so you can get right to measuring relative humidity and temperature.
 2
  • Prix réduit / -4,00 €
Available
Senseurs

DSM501A dust sensor

SENDUSDSM501A
14,00 € 18,00 €
The dust sensor module DSM501A is low cost,compact size for a particle density sensor.
 2
Available
Senseurs

Electronic Brick - Grove - Gas Sensor MQ2

SENSESSEN90512P
9,60 €
he Grove - Gas Sensor(MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol, Smoke or Propane. Due to its high sensitivity and fast response time, measurement can be taken as soon as possible. The sensitivity of the sensor can be adjusted by potentiometer.
 2
Available
Accueil

Flame Sensor

ECRSPM21020F
1,17 €
Simple flame sensor
 2
Available
Senseurs

GP2Y1010AU0F Compact Optical Dust Sensor

SENDUSTGP2Y1010AU
11,67 €
The Sharp Optical Dust Sensor (GP2Y1010AU0F) is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems.
 2
Out of stock
Electronique

Grove - Alcohol Sensor

SENSESSEN21723P
11,20 €
Alcohol sensor is semiconductor sensor for alcohol detection. It has good sensitivity and fast response to alcohol, suitable for portable alcohol detector.
Available
Electronique

Grove - Dust Sensor

SENSESGRODUST
18,00 €
Sensor is to create Digital (Lo Pulse) output to Particulate Matters (PM). Lo Pulse Occupancy time (LPO time) is in proportion to PM concentration. The output is for PM whose size is around 1 micro meter or larger. We can use the sensor to detect the dust in clean room.
 2
Available
Senseurs

Grove - Gas Sensor (MQ9 LPG,i-butane, methane,...

SENSESGROMQ9
10,00 €
The Grove - Gas Sensor module is useful for gas leakage detecting(in home and industry). It can detect LPG, i-butane, methane, alcohol, Hydrogen, somke and so on. Measurements can be taken as soon as possible based on its fast response time. Also the sensitivity can be adjusted by the potentiometer. Each Grove - Gas Sensor Kit consists of one gas sensor...
 2
Available
Accueil

Grove - Gas Sensor MQ5

SENSESSEN90502P
9,60 €
The Grove - Gas Sensor(MQ5) module is useful for gas leakage detecting(in home and industry). It can detect LPG, natural gas, town gas and so on. Based on its fast response time. measurements can be taken as soon as possible. Also the sensitivity can be adjusted by the potentiometer.
Out of stock
Electronique

Grove – Air quality sensor

SENSESGROAIR
16,00 €
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases.
Out of stock
Electronique

Grove – Temp & Humi Sensor

SENSESGROTMPHM
7,00 €
This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity and the temperature is measured by a negative temperature coefficient (NTC) thermistor. It has excellent reliability and long term stability. Please note that this sensor will not work for temperatures below 0 degree.
 2
Available
Electronique

GY-BME280 High Precision Atmospheric Pressure,...

SENGYBME280
10,08 €
GY-BME280 is a Breakout Board featuring a Bosch Sensortec BME280 Temperature, Humidity & Pressure Sensor. The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm. Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k,...
 2
Available
Electronique

Minuterie mécanique

SEDMECTIMER
4,17 €
Minuterie mécanique Want a more intuitive and tangible timer for your project? This mechanical timer is a quick, easy and inexpensive way! Compared to digital ones, mechanical timers require no programming and won’t lose any settings to unexpected power-off. This is a ubiquitous part inside each kitchen timer or fan, so it takes you no trouble to learn....
Product added to wishlist
Product added to compare.