This translation board (T board) bridges exsiting Arduino shield to be used on pcDuino. It also has a switch on board to select if 3.3V shield or 5V will be used. With this handy T-board, now you can play with all the exisiting shields on pcDuino!
This is a power module for the standard bread boards (Small and Medium sized). It's concave design so will not wast your proto zone. It also supports both 5v and 3.3v (both can be enabled on each power rail).
We think it is a must to have on your workbench, really.
To facilitate the use of Raspberry Pi and screen module to work together, we specifically developed a simple adapter board and customized a batch of 26-pin (2X13) cable . Simply insert the screen module into the adapter board, then connect the board and Raspberry Pi plate with cable, thus the hardware connection is done, saving the trouble of...
The module is used for charging of single lithium battery or multiple lithium batteries in parallel, and the charging port can take power from the USB port. output USB micro usb input / usb output / and charging lipo
This is a splittable 40 pin dual female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.