EL wire white 3m

SESELWIWH
€11.67

This is a 3 meter long roll, with high-brightness and long-life EL wire. The brightest and best looking EL color we could find for you. You need an inverter to drive the EL light, to control it, please pick up an EL Shield.

HackSpark
  1. All our products are shipped from France.
  2. A doubt about a purchase ? Return your items and get money back.
  3. We carefully choose and test the products we sell.
Feature
  • Can be bent, paste or hang up, can be made into any shape and length so it is very easy and convenient to install and use.
  • Low power consumption (cold light, 97% electricity converted into light, no heat loss), no UV, soft light, environmental friendly materials.
  • The light radiation at night is extremely bright, eye-catching.
  • Ultrathin, lightweight, easy to use for production and construction of everything.
 
Specification
  • Operating Voltage: 20 ~ 220V           Optimum Operating Voltage: 120V 
  • Operating Frequency: 50 ~ 5000Hz   Optimum Operating Frequency :1500-2000Hz 
  • Static Capacitance: 6nf / m (20 ° C, the RH <80%) 
  • Brightness: (at 120V, 200Hz ~ 2000Hz) 30cd/m2 ~ 126 cd/m2 
  • Power: (at 120V, 200Hz ~ 2000Hz)108mw / m ~ 1032mw / m 
  • Light life: (at 100V, 400Hz) normal temperature and humidity, approximately 8000 hours 
  • Operating Temperature / Humidity: -10 ° C  ~ +60° C; RH <90% 
  • Storage Temperature / Humidity: -10 ° C  ~ +60 ° C; RH <65% 
  •  Thickness: 2.3mm
6 Items
New product
No reviews

Customers who bought this product also bought:

Available
Grove

Grove - Infrared Emitter

SEDGROIREMI
€4.00
The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the other side . An infrared LED is like any other LED, with its color centered around 940nm. We can use the emitter not only to transmit data or commands, but also to emulate remotes to control your home appliance...
2
Available
Electronics

EL wire red 3m

ELWSED3RED
€11.67
This is a 3 meter long roll, with high-brightness and long-life EL wire. The brightest and best looking EL color we could find for you. You need an inverter to drive the EL light.   Please note! EL tape, EL wire and EL panel are made with different processes - the color and brightness will not be consistent between the different types of EL products.
2
Available
Home

GY-801 10DOF IMU (Barometer, Gyroscope,...

SENIMUGY801
€15.00
Using sensors L3G4200D, ADXL345, HMC5883L and BMP180, this 10 degrees of freedom IMU will add a whole new world of sensing to your new project.
2
Out of stock
Electronics

EL wire 2xAA pocket inverter

ENESEDEL2AA
€6.25
This is a small portable EL wire inverter. Powered by 2 AA batteries (not included). It can drive 1 to 5 meter of our high-brightness EL wire approximately 10 hours. There is a button for selecting steady/slow blink/fast blink/on/off modes. There's a removable cover on the back. Comes with a 2.5mm pitch female JST connector. To connect an EL wire to...
View
2
Available
Dev. Tools

PL2303 USB to UART (TTL) breakout

USBITEPL23035V
€4.08
It's a small USB to TTL serial tool, using the PL2303 chip. You can use it to connect some serial device to your PC via USB port, an avr, an msp430 or an stm32 for example. It's very cheap compared to the ft232 alternative and works very well, up to more than 1mbit/s.
2
Available
Electronics

Soil moisture sensor

SENGENMOIST
€2.00
Soil moisture module is most sensitive to the ambient, generally used to detect the moisture content of the soil.When the module can not reach the threshold value, DO port output high, when the the soil humidity exceeds a set threshold value, the module D0 output low;The small board digital output D0 can be connected directly to the MCU, MCU to detect...
Product added to wishlist
Product added to compare.