Your cartThere are no more items in your cart
3.7V 3350mAh Li-Ion 18650 Battery (3.2V-4.2V, LG, LGABF1L1865, LiNiCOMnO2 chemistry)
Nice little battery that is really inexpensive for the (quite high) power it provides. Be sure to use it with a proper holder.
- Capacity Std.
- charge / discharge Nominal 33500mAh (C nom )
- Minimum 3250mAh (C min )
- Nominal Voltage
- Average 3.7V
- Standard Charge
- Constant current 1925mA
- Constant voltage 4.2V
- Charging time: 4.0hrs.
- Max. Discharge Current for continuous discharge 2C / 6A (peak 10A)
- Weight Approx. Max. 46.5g
- Operating Temperature
- Charge 0 ~ 45°C
- Discharge -20 ~ 60°C
- Storage -20 ~ 50°C
- Energy density
- Volumetric: 676 Wh/l
- Gravimetric: 243 Wh/kg
Customers who bought this product also bought:
Standard size breadboard that is perfect for prototypes. It does even have power rails on the sides to allow for more than one power level. The one you will get is white and not transparent as in the picture.
This is a digital temperature sensor, that is already calibrated. The measurement is done where the sensor is, no need for long insulated wire or complicated ADC design. This sensor is therefore also perfect for use with a Raspberry Pi, as it is not analogic, all the data is transmitted in digital One Wire protocol.
Put on your sunglasses before using this matrix with 64 eye-blistering RGB LEDs adorn the panel for a blast of configurable color. Arranged in a 8x8 matrix, each pixel is individually addressable. Only one pin is required to control all the LEDs. You can cut a trace and use nearly any other pin if you need some customization.
The very popular 595 shift register chip of the 74 series is used a lot by hobbyis because of its wide availability, good speed and simplicity. Just plug it on an arduino like shown in the tutorials and youi have 8 more outputs, put two and you have 16 more outputs ! (up to a lot of them actually, with only three pins !)
Mini USB Nano V3.0 ATmega328P 5V 16M Micro Controller Board CH340 Chip For Arduino
This protoboard is double sided, meaning that you can easily put components on both sides. It is perfect for all your DIY projects, as with its 0.1" (2.54mm) pitch it fits nearly all the through hole components.
Micro USB Male to USB Female OTG Adapter Android Tablet and Phone
The DS18B20+ is a programmable resolution 1-wire digital thermometer in 3 pin TO-92 package. This digital thermometer provides 9bit to 12bit celsius temperature measurements and has an alarm function with non-volatile user programmable upper and lower trigger points. The DS18B20 communicates over a 1-wire bus that by definition requires only one data line...
Nice little case shipped as a kit for your Arduino.