Your cart
There are no more items in your cart
The Iteaduino Nano is a small, complete, and breadboard-friendly board based on the Adruino Nano 3.0. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Micro USB cable instead of a standard one.
The Iteaduino Nano is a small, complete, and breadboard-friendly board based on the Adruino Nano 3.0. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Micro USB cable instead of a standard one.
Specification
| Microcontroller | Atmega328 |
| Operating Voltage | 5V |
| POWER Supply Voltage(recommended) | 7~12V |
| Power supply Max Voltage | 12V |
| Digital IO pins | 20 |
| Analog Input pins(ADC) | 8 |
| DC Output current on per IO lines | 40mA |
| Flash Memory | 32 KB of which 2 KB used by boot loader |
| SRAM | 2 KB |
| EEPROM | 1KB |
| Clock frequency | 16 MHz |
| Dimension | 43.18X17.78X1.6mm |
Hardware top view
Download
New product
No reviews
Customers who bought this product also bought:
Out of stock
Dev. Tools
BeagleBone Black (Rev. C)
LINBEAGLEBONEBLK
€55.83
BeagleBone Black is the newest member of the BeagleBoard family and is a lower-cost, high-expansion focused BeagleBone, featuring the Sitara AM3359 ARM Cortex-A8 32-Bit RISC microprocessor from Texas Instruments. It is similar to the BeagleBone but with some previous features removed to make way for the excellent new features.
Available
Home
ITeaduino Tiny
MCBITDTINY
€7.50
Iteaduino Tiny is a mini development board based on Attiny85 master, which is cheap, compact and easy to use with low power consumption. The mainboard is a derivative board with reference to digispark design, and it supports use of specific Arduino IDE and uses Arduino syntax for programming which is quite convenient.
Out of stock
Power and Energy
Lipo Charger Pro (Lipo Rider Pro compatible 1A...
ECRPSB01012B
€12.92
The LiPo Charger is extremely affordable and easy to use. No programming is required. Plug it in and it works. The internal charger IC handles all the power flow between the various components.
Out of stock
Electronics
USB Wifi dongle with Antenna (pcDuino,...
WIRANTUSBWIF
€15.42
You can simply plug this USB Wifi dongle into the USB port of your Dev Board and you're ready to connect to a nearby wireless network with extra power thanks to its antenna.
Available
Electronics
0.1" (2.54mm) Male header 1 row / 40 pins
CONGENMAL40
€0.50
This is a simple male header, very useful for a lot of things, including to plug boards like the arduino on your protoboards.
Available
Electronics
433Mhz Wireless door sensor (door switch)
SENWIRDOOR
€7.50
This wireless door switch is a great addition to your project. With its included batteries, just put it on your door using the given tape and voilà, a new door sensor !
Available
Electronics
3 Axis Compass GY-271 (HMC5883L breakout) (sensor)
SENCOMPGY271
€4.58
This 3 Axis Compass boad has a very good sensibility and features all the needed components to use the excellent HMC5883L chip
Available
Electronics
GY-61 ADXL335 Accelerometer breakout module...
SENITEADXL335
€8.00
*MMA7361L
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
Available
Electronics
Breadboard Jumper Wires Set (140 PCs Pack)
CONBRBJMPWIR
€5.75
This set of jumper wires can help you remove the clutter on your breadboard. It comes in 14 different lengths and 8 colors to keep your circuit on the surface. All of them are pre-formed and pre-sorted. You can easily find the color and length you need within a sec.
There are 10 pcs for each length including 2/5/7/10/12/15/17/20/22/25/50/75/100 and 125mm.
Available
Electronics
Prototype Shield for Raspberry Pi
PCBRPIPROTO
€7.08
Prototype Shield for Raspberry Pi is a prototype board that you can combine your raspberry pi with other components, modules. As a prototype board, it also provides power and state indicator light. Besides. Note: not include Raspberry Pi
Tap to zoom
