Display

 2
Available
Display

UART Serial 16x2 Characters LCD (White on Blue)...

LCDITESERIAL1602
€12.50
Character LCM screen is a common display device, we provide 16×2 with Blue black light LCD. But these LCD need more than 6 pins for controlling and you need to know the control register and time series. This one is a bit different, you just send the message and voilà ! Only two pins :)
 2
  • Reduced price / -€0.60
Available
Display

Super Bright LED Strip (White), 60 LEDs/M...

LEDSTR60W12V
€3.98 €4.58
Description Product Name: LED light strips, 60 LEDs per meter, 5050 (5*5mm) LED Working voltage: DC12V, apply this voltage should work fine. Power:Roughly 10W per meter, 1A Current Color: Full white Life cycle: 50K hours, attenuation 0.6% every year Application: home、engineering、outdoor Bared LED strip without any water-proof or plastic sleeve protection,...
Available
Dev. Tools

STM32 L 053 Discovery with E-Paper...

ST Microelectronics
MCBSTDIS32L053
€24.92
The STM32L053 discovery kit helps you to discover the ultra-low-power microcontrollers of the STM32 L0 series. It offers everything required for beginners and experienced users to get started quickly and develop applications easily. Based on an STM32L053C8T6, it includes an ST-LINK/V2-1 embedded debug tool interface, linear touch sensor, touch keys, IDD...
 2
  • Reduced price / -€32.00
Available
Display

SOLDE 1M/144leds WS2812 Digital RGB LED...

LEDSTR144PMWS2812
€28.00 €60.00
Digital RGB LED Flexi-Strip is an intelligent light source consist s of WS2812B RGB LED with Integrated Driver Chip. The control circuit and RGB chip are integrated in a package of 5050 components. This LED flexible strip is a full-color that external control for each lamp beads. It with high brightness, can achieve effects of full color running water,...
 2
  • Reduced price / -€35.00
Product available with different options
3D Printing

Smart LCD Controller For RepRap Ramps 1.4 3D...

Electrogragon
RPRJANLCD3DP
€15.00 €50.00
    The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. . 
 2
Available
Display

Small e-paper Shield

EPAPSEDS
€27.00
e-paper might be the most comfortable material to read. It reflects light instead of emits light to mimic the experience of conventional paper reading. And in this way much less power is consumed.
 2
Available
Display

Serial Graphic LCD 128*64 (ST7565/67 ctrl) -...

iTeadStudio
LCDITEDIS008
€19.15
Very high quality serial lcd with backlight, to add a graphic display to your project in minutes, without the need of much IO lines with fast refresh rate.
 2
Available
LED Displays

Raspberry Pi Sense HAT,...

CONELEMPCRASPHAT
€33.25
Raspberry Pi Sense HAT, Orientation/Pressure/Humidity/Temperature Sensors
 2
Out of stock
Dev. Tools

Raspberry PI LCD1602 Add-on

iTeadStudio
LCDRPI1602SHIELD
€12.00
Raspberry PI LCD1602 Add-on is customized for Raspberry Pi interfaces based on LCD1602 display module.
 2
Available
Home

Raspberry PI LCD Adapter Kit (for ITDB02 and...

CONRPILCDITDB02
€3.60
To facilitate the use of Raspberry Pi and screen module to work together, we specifically developed a simple adapter board and customized a batch of 26-pin (2X13) cable . Simply insert the screen module into the adapter board, then connect the board and Raspberry Pi plate with cable, thus the hardware connection is done, saving the trouble of...
 2
Out of stock
Display

Raspberry Pi 7” TouchScreen Display (Official)(...

LCDRPI7OFF
€75.00
The 7” Touch screen Monitor for Raspberry Pi gives users the ability to create all - in - one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal co nversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a...
 2
Available
Display

Raspberry Pi 7” TouchScreen Display ( HDMI LCD,...

LCDWSH7P1024600
€70.00
The 7” Touch screen Monitor for Raspberry Pi gives users the ability to create all - in - one, integrated projects such as tablets, infotainment systems and embedded projects. The 1024 x 600 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a...
 2
  • Reduced price / -€30.00
Out of stock
Dev. Tools

Raspberry Pi 5” LCD Display HDMI w/touch 800×480

LCDRPI5TCH
€45.00 €75.00
Very nice display compatible with Raspberry Pi 3 B, 2 B, 1 A+ and B+. It fits easily and has a very good response time thanks to its HDMI interface. This is the only one we've seen to boast this interface while still being a plug-in cape/shield. Setup time is quite fast, you just have to set the resolution in the config.txt of your raspberry pi and voilà...
 2
Available
Display

Raspberry Pi 3.5” TouchScreen Display ( IC LCD,...

LCDWSH35P320480
€26.00
This TFT LCD is designed for RPI, you can design it for many other things. It is play and plug, very easy and good item for your raspberry pi project and just simple connect to Raspberry Pi, you can start you Raspberry pi experience.
 2
Out of stock
Display

OLED Display (128x64, 2 colours white/blue)...

LCDOLED3COLWB
€10.00
Tiny OLED display with a crisp 128x64 resolution that supports a lot of control modes : I2C (2 wires), SPI 3 wires, SPI 4 wires, 8080, etc. depending on your needs. Supporting both 5v and 3.3v, this display can be used with an Arduino, a Raspberry Pi, an STM32 mcu, etc. Oh, and did I mention it was cheap, like in a really low price at a great quality ? It...
 2
  • Reduced price / -€3.11
Available
Display

Nokia 5110 LCD (screen)

iTeadStudio
LCDNOK5110
€6.00 €9.11
Nokia 5110 LCD is a low-cost 84*48 pixels graphic LCD. It uses the PCD8544 controller. The PCD8544 interfaces to microcontrollers through a serial bus interface (5-wires).
Available
Others

Micro HDMI to HDMI M Adapter Cable 1M

CONMICHDHDCM
€5.42
This is a micro HDMI(Type D) to HDMI(Type A) Adapter. It provides a more convenient way to use micro HDMI’s equitment, like BeagleBone Black board.and PI 4
Available
Others

Micro HDMI to HDMI Adapter Cable 200mm

CONMICHDHDC
€5.75
This is a micro HDMI(Type D) to HDMI(Type A) Adapter. It provides a more convenient way to use micro HDMI’s equitment, like BeagleBone Black board.
 2
Available
Home

MD070SD 7" 16-Bit Parallel Bus TFT Module with...

LCDMD070SD
€70.83
MD070SD adopts 8080 timing sequence with 16-bit parallel bus interface, resolution of 800 × 480, display panel with 16M color and integrated with 8-page video memory (the remaining memory could be used as extended memory). The interior of module utilizes CPLD + SDRAM mode to drive RGB interface display, which does not only realize conversion between the...
Product added to wishlist
Product added to compare.