Arduino

 2
Available
Home

BTBee Pro

iTeadStudio
WIRITEBTBEEPRO
€19.38
BTBee Pro is a serial port Bluetooth module which can be compatible with the shields which with XBee sockets. It's designed for Bluetooth wireless transfer. It supports Slave and Master mode, can be plugged into XBee socket and using the UART for transparent transmission. This module supports Bluetooth Wireless Program as well.
 2
  • Reduced price / -€5.10
Available
Prototyping

16x2 LCD Keypad shield for Arduino (Arduino...

iTeadStudio
ASH00003
€7.40 €12.50
This very popular LCD Keypad shield can be directly plug on an Arduino board, no soldering or fly-wiring needed.
 2
Out of stock
Arduino

2.8" TFT Touch shield for Arduino (Arduino...

iTeadStudio
ASHITELCD28LCDTOUCH
€24.17
The 2.8”TFT with Touch Shield is designed for all the Arduino compatible boards. It works in 3.3V voltage level (but with necessary switches from arduino 5v). It can be directly plugged on the Arduino and other compatible boards. It will offer the display, touch and storage function for the Arduino board.
 2
Available
Dev. Tools

433Mhz RF link kit

iTeadStudio
WIRITE433LINK
€3.92
The 433M RF link kit is consisted of transmitter and receiver, popular used for remote control. 433MHz frequency and ASK modulation.
 2
Available
Home

4X4 Key-pad shield with display interface: IBridge

ASHITDIBRI
€6.16
IBridge is a 4X4 key-pad shield with a 5110 Graphic LCD interface. It is compatible with Arduino and IFLAT-32, you can plug it on Arduino/IFLAT-32 board directly, and you can get the small development platform with keypad input and Graphic LCD display.  5110 lcd not included.
  • Reduced price / -€16.20
Available
Sales

8x5 WS2812 RGB Led Matrix Shield with...

LMARGB8X5WS2812
€9.80 €26.00
Put on your sunglasses before putting this shield onto your 'duino - 40 eye-blistering RGB LEDs adorn the panel for a blast of configurable color. Arranged in a 5x8 matrix, each pixel is individually addressable. Only one pin is required to control all the LEDs. You can cut a trace and use nearly any other pin if you need some customization.
 2
Available
Electronics

Active Speaker Buzzer Module 5V (Arduino...

MODBUZZ5V
€1.50
Active Buzzer is an integrated structure electronic transducers, DC voltage supply, widely used in computers, printers, copiers, alarms, electronic toys, automotive electronic equipment, telephones, timers and other electronic products for sound device.
 2
Out of stock
Electronics

Arduino Esplora compatible

MCBARDESP
€20.83
Esplora is a microcontroller board derived from the Arduino Leonardo. The Esplora differs from all preceding Arduino boards in that it provides a number of built-in, ready-to-use setof onboard sensors for interaction. It's designed for people who want to get up and running with Arduino without having to learn about the electronics first. For a...
 2
Out of stock
Main Boards and Compatible

Arduino Leonardo (with headers)

Arduino
MCBARDLEONARDO
€20.50
This is the official current low-cost Arduino board, top quality, made in Italy and with a Zero Carbon Footprint! The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an...
 2
  • Reduced price / -€5.27
Out of stock
Dev. Tools

Arduino Mega 2560 ADK (Arduino Compatible)

Arduino
MCB00005
€57.17 €62.44
The Arduino ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e IC. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power...
 2
Out of stock
Dev. Tools

Arduino Mega 2560 R3 (Arduino Compatible)

Arduino
MCB00004
€50.00
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the...
Out of stock
Arduino

Arduino Mega Stackable Header Kit (Arduino...

CONITEARDMEGSTKHDR
€1.58
This is a pack which includes: 1 pcs 2×18 pin lengthen female header 1 pcs 6-pin lengthen female header 5 pcs 8-pin lengthen female headers They all have 2.54mm spacing between pins.
 2
Available
Dev. Tools

Arduino Micro (without headers)

Arduino
MCBARDMICRO
€16.58
The Arduino Micro is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer...
 2
Available
Dev. Tools

Arduino Mini 05 (light / without headers)...

Arduino
MCBARDMINI05LIGHT
€15.50
The Arduino Mini is a small microcontroller board originally based on the ATmega168, but now supplied with the 328.(datasheet The new Mini (revision 05) has a new package for the ATmega328, which enables all components to be on the top of the board. It also has an onboard reset button. The new version has the same pin configuration as revision 04....
 2
Out of stock
Dev. Tools

Arduino Mini 05 (with headers) (Arduino...

Arduino
MCBARDMINI05
€14.13
The Arduino Mini is a small microcontroller board originally based on the ATmega168, but now supplied with the 328.(datasheet), intended for use on breadboards and when space is at a premium. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, and a 16 MHz crystal oscillator. It can be programmed with the USB...
Product added to wishlist
Product added to compare.