List of products by brand iTeadStudio

 2
Out of stock
Dev. Tools

iTead 3G shield for Arduino (Arduino Compatible)

iTeadStudio
ASHITE3G
€62.50
The 3G shield is based on SIM5216E module. The SIM5216 series is Multi-Band HSDPA/WCDMA/GSM/GPRS/EDGE module solution which supports HSDPA up to 3.6Mbps for downlink data transfer. The 3G shield can be used for 3G communication, it is controlled via AT commands and fully compatible with Arduino.
 2
  • Reduced price / -€20.00
Available
Dev. Tools

Iteaduino Plus A20 (ARM Linux board, Dual-core...

iTeadStudio
LINAA20ITEA
€55.00 €75.00
Iteaduino Plus is an open source ARM development board, which is based on Allwinner A20 SoC, small size, hacker friendly, extendable and very low-cost. Compare with Raspberry Pi, it has higher performance, SATA supported and more extension interfaces.
 2
Out of stock
Arduino

iTead WiFi shield for Arduino (Arduino Compatible)

iTeadStudio
ASHITEWIFI
€50.00
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Iteaduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield.
 2
Available
Arduino

Seeed Studio WiFi shield for Arduino (Arduino...

iTeadStudio
ASHSESWLS06201P
€45.00
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Seeeduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield. It features an independent antenna which can cover a wider range and transmit stronger signals. With supports for common TCP, UDP and FTP...
 2
Available
Dev. Tools

Iboard Pro

iTeadStudio
MCBITEIBOARDPRO
€41.40
The Iboard Pro is a unique Arduino board which features a WIZnet Ethernet port with POE, an XBee socket, ITDB02 Serial/Parallel LCD module interface, RTC, nRF24L01+ module interface, Micro SD socket and an ATMega2560. This board will add wireless XBee control as well as internet connectivity to your projects. It’s great for anything from home automation...
 2
Available
Dev. Tools

Iboard

iTeadStudio
MCBITEIBOARD
€33.00
Iboard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, nRF24L01+ module interface and an ATMega328. This board will add wireless XBee / nRF24L01+ control as well as internet connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless! Iboard can be used as an...
 2
  • Reduced price / -€1.67
Available
Dev. Tools

Iteaduino BT HC-05 (Arduino-compatible with...

iTeadStudio
MCB00001
€30.00 €31.67
Iteaduino-BT is an Arduino compatible board with a master/slave Bluetooth Module HC-05. It based on Arduino Duemilanove, 100% compatible to its existing program, shield and IDE. On the hardware part, remarkable changes are taken to improve the flexibility and user experience.
 2
Out of stock
Dev. Tools

BT (Bluetooth) BLE Shield for Arduino

iTeadStudio
ASHITEBTBLE
€24.50
BLE shield is to adapt Bluetooth Low Energy to serial port, which is specifically designed for Arduino motherboard and compatible boards, plug and play.
 2
Out of stock
Arduino

2.4" TFT Touch shield for Arduino (Arduino...

iTeadStudio
ASHITELCD24LCDTOUCH
€24.17
The 2.4”TFT with Touch Shield is designed for all the Arduino compatible boards. It works in 3.3V voltage level (but with necessary switches from arduino 5v). It can be directly plugged on the Arduino and other compatible boards. It will offer the display, touch and storage function for the Arduino board.
 2
Out of stock
Dev. Tools

Music Player Shield for Arduino (MP3, SD card,...

iTeadStudio
ASHITEMUSPLA
€20.00
The iTead Music Player Shield is based on CECL08D. The CECL08D chip can be used to decode MP3/WAV format audio file. The music player shield has SD card socket and USB interface, supporting USB and SD card play. Just plug and play!
 2
Available
Home

BTBee Pro

iTeadStudio
WIRITEBTBEEPRO
€19.38
BTBee Pro is a serial port Bluetooth module which can be compatible with the shields which with XBee sockets. It's designed for Bluetooth wireless transfer. It supports Slave and Master mode, can be plugged into XBee socket and using the UART for transparent transmission. This module supports Bluetooth Wireless Program as well.
 2
Available
Display

Serial Graphic LCD 128*64 (ST7565/67 ctrl) -...

iTeadStudio
LCDITEDIS008
€19.15
Very high quality serial lcd with backlight, to add a graphic display to your project in minutes, without the need of much IO lines with fast refresh rate.
 2
Out of stock
Dev. Tools

BTBee (Bluetooth Bee, serial tu bluetooth module)

iTeadStudio
WIRITEBTBEE
€18.38
BTBee is an easy to use Bluetooth SPP module compatible with existing Xbee sockets, designed for transparent wireless serial connection setup. It can directly plug into the Bee sockets and use the UART port for Bluetooth communication.
Out of stock
Bluetooth

BT (Bluetooth) Shield v2.2 for Arduino (Arduino...

iTeadStudio
ASHITEBT22SLA
€16.00
The Bluetooth Shield integrates a HC-05 Serial Bluetooth module. It can be easily used with Arduino for transparent wireless serial communication. You can choose two pins from Arduino D0 to D7 as Software Serial Ports to communicate with Bluetooth Shield (D0 and D1 is Hardware Serial Port).
 2
Out of stock
Electronics

Non Blind Zone Ultrasonic Module SDM-IO

iTeadStudio
SENITEUSRSDMIO
€14.50
Non Blind Zone Ultrasonic Module SDM-IO is a stable and measure the distance accurately ultrasonic module which provides 0cm - 1500mm non-contact measurement function,the ranging accuracy can reach to 3mm. Its performance can compare with SRF05/SRF02 ultrasonic distance measuring module, also it has non-blind design and fast response.
 2
Out of stock
Arduino

ITeaduino Nano USB Microcontroller

iTeadStudio
MCB00002C
€14.17
The Iteaduino Nano is a small, complete, and breadboard-friendly board based on the Adruino Nano 3.0. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Micro USB cable instead of a standard one.
 2
  • Reduced price / -€2.00
Available
Display

Graphic LCD 128*64 (White on Blue) (screen)

iTeadStudio
LCDITE12864WB
€14.00 €16.00
This is a framed graphical LCD 64x128 with yellow or blue black-light . This unit is a very clear STN type LCD with a simple command interface.
 2
Out of stock
Dev. Tools

Raspberry PI LCD1602 Add-on

iTeadStudio
LCDRPI1602SHIELD
€12.00
Raspberry PI LCD1602 Add-on is customized for Raspberry Pi interfaces based on LCD1602 display module.
 2
Available
Home

Dual stepper motor shield

iTeadStudio
ASHITEDUASTE
€11.58
Dual stepper motor driver shield can drive 2 stepper motors at the same time by Arduino. It can work with the power supply from 4.75V to 30V. High accuracy controlling can be supported by Arduino for CNC milling machine.
 2
Available
Electronics

433Mhz Wireless Serial Transceiver Module - 40...

iTeadStudio
SEDSERTRAN40M
€10.00
Serial transceiver module is a low cost, high performance transparent FSK transceiver with operating at 434 MHz. It features small size, high output power, high sensitivity, long transmission distance and high communication data rate with auto set up for communication change and data receiving and transmission control.
 2
  • Reduced price / -€4.50
Available
Arduino

16x2 LCD Keypad shield for Arduino (Arduino...

iTeadStudio
ASH00003
€8.00 €12.50
This very popular LCD Keypad shield can be directly plug on an Arduino board, no soldering or fly-wiring needed.
 2
  • Reduced price / -€2.00
Available
Shields

ProtoScrewShield for Arduino (Arduino Compatible)

iTeadStudio
ASH00001
€8.00 €10.00
Your project uses external peripherals and needs them connected securely ? Don't look twice, and take that shield. You can add components on it as it has a 0.1" spaced through hole for standard dip components as well as stackable headers and screw headers.
 2
  • Reduced price / -€5.00
Out of stock
Dev. Tools

nRF24L01+ with PA and LNA 2.4Ghz RF module...

iTeadStudio
WIRITENRF24L01PALNA
€7.00 €12.00
This is a long distance 2.4G wireless module which basic on nRF24L01+ chip, and there is the PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
 2
  • Reduced price / -€3.11
Available
Display

Nokia 5110 LCD (screen)

iTeadStudio
LCDNOK5110
€6.00 €9.11
Nokia 5110 LCD is a low-cost 84*48 pixels graphic LCD. It uses the PCD8544 controller. The PCD8544 interfaces to microcontrollers through a serial bus interface (5-wires).
 2
  • Reduced price / -€6.00
Available
Electronics

ADXL345 Accelerometer breakout module Triple-Axis

iTeadStudio
SENITEADXL345
€4.00 €10.00
The ADXL345 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale rangethe static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
Product added to wishlist
Product added to compare.