List of products by brand iTeadStudio

 2
Available
Home

BTBee Pro

iTeadStudio
WIRITEBTBEEPRO
€19.38
BTBee Pro is a serial port Bluetooth module which can be compatible with the shields which with XBee sockets. It's designed for Bluetooth wireless transfer. It supports Slave and Master mode, can be plugged into XBee socket and using the UART for transparent transmission. This module supports Bluetooth Wireless Program as well.
 2
  • Reduced price / -€4.50
Available
Arduino

16x2 LCD Keypad shield for Arduino (Arduino...

iTeadStudio
ASH00003
€8.00 €12.50
This very popular LCD Keypad shield can be directly plug on an Arduino board, no soldering or fly-wiring needed.
 2
Available
Arduino

2.4" TFT Touch shield for Arduino (Arduino...

iTeadStudio
ASHITELCD24LCDTOUCH
€24.16
The 2.4”TFT with Touch Shield is designed for all the Arduino compatible boards. It works in 3.3V voltage level (but with necessary switches from arduino 5v). It can be directly plugged on the Arduino and other compatible boards. It will offer the display, touch and storage function for the Arduino board.
 2
Available
Dev. Tools

433Mhz RF link kit

iTeadStudio
WIRITE433LINK
€3.92
The 433M RF link kit is consisted of transmitter and receiver, popular used for remote control. 433MHz frequency and ASK modulation.
 2
Available
Home

433Mhz Wireless Serial Transceiver Module - 40...

iTeadStudio
SEDSERTRAN40M
€10.00
Serial transceiver module is a low cost, high performance transparent FSK transceiver with operating at 434 MHz. It features small size, high output power, high sensitivity, long transmission distance and high communication data rate with auto set up for communication change and data receiving and transmission control.
 2
  • Reduced price / -€6.00
Available
Electronics

ADXL345 Accelerometer breakout module Triple-Axis

iTeadStudio
SENITEADXL345
€4.00 €10.00
The ADXL345 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale rangethe static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
Available
Electronics

Battery Charging StepUp Power Supply Module...

iTeadStudio
POWSEDLITCHM
€3.00
The module is used for charging of single lithium battery or multiple lithium batteries in parallel, and the charging port can take power from the USB port. output USB micro usb input / usb output / and charging lipo
 2
Out of stock
Dev. Tools

BT (Bluetooth) BLE Shield for Arduino

iTeadStudio
ASHITEBTBLE
€24.50
BLE shield is to adapt Bluetooth Low Energy to serial port, which is specifically designed for Arduino motherboard and compatible boards, plug and play.
Out of stock
Bluetooth

BT (Bluetooth) Shield v2.2 for Arduino (Arduino...

iTeadStudio
ASHITEBT22SLA
€16.00
The Bluetooth Shield integrates a HC-05 Serial Bluetooth module. It can be easily used with Arduino for transparent wireless serial communication. You can choose two pins from Arduino D0 to D7 as Software Serial Ports to communicate with Bluetooth Shield (D0 and D1 is Hardware Serial Port).
 2
Out of stock
Dev. Tools

BTBee (Bluetooth Bee, serial tu bluetooth module)

iTeadStudio
WIRITEBTBEE
€18.38
BTBee is an easy to use Bluetooth SPP module compatible with existing Xbee sockets, designed for transparent wireless serial connection setup. It can directly plug into the Bee sockets and use the UART port for Bluetooth communication.
 2
Out of stock
Display

COG 128x64 Graphic LCD module (controller...

iTeadStudio
LCDITEDIS020
€9.08
This is a GOG 128x64 Graphic LCD module (controller sed1565). It has an Yellow mode STN panel composed of 128 segments and 64 commons. The LCM can be easily accessed by microcontroller via parallel 6800 series interface.
 2
Available
Home

Dual stepper motor shield

iTeadStudio
ASHITEDUASTE
€11.58
Dual stepper motor driver shield can drive 2 stepper motors at the same time by Arduino. It can work with the power supply from 4.75V to 30V. High accuracy controlling can be supported by Arduino for CNC milling machine.
 2
Available
Electronics

Freescale MMA7361L Accelerometer breakout...

iTeadStudio
SENITEMMA7361L
€9.00
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and...
 2
  • Reduced price / -€2.00
Available
Display

Graphic LCD 128*64 (White on Blue) (screen)

iTeadStudio
LCDITE12864WB
€14.00 €16.00
This is a framed graphical LCD 64x128 with yellow or blue black-light . This unit is a very clear STN type LCD with a simple command interface.
 2
Available
Electronics

GY-61 ADXL335 Accelerometer breakout module...

iTeadStudio
SENITEADXL335
€8.00
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
 2
Available
Dev. Tools

Iboard

iTeadStudio
MCBITEIBOARD
€33.00
Iboard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, nRF24L01+ module interface and an ATMega328. This board will add wireless XBee / nRF24L01+ control as well as internet connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless! Iboard can be used as an...
 2
Available
Dev. Tools

Iboard Pro

iTeadStudio
MCBITEIBOARDPRO
€41.40
The Iboard Pro is a unique Arduino board which features a WIZnet Ethernet port with POE, an XBee socket, ITDB02 Serial/Parallel LCD module interface, RTC, nRF24L01+ module interface, Micro SD socket and an ATMega2560. This board will add wireless XBee control as well as internet connectivity to your projects. It’s great for anything from home automation...
 2
Available
Electronics

IIC EEPROM and RTC Module

iTeadStudio
SENSEDIICRTCEEPROM
€4.38
With compact design, the board can integrate the real-time clock module DS1307, EEPROM memory AT24C32 and digital temperature sensor DS18B20 (not supplied on the board) which are connected via I2C bus together on a 27mm*28mm*8.4mm board.
 2
Out of stock
Dev. Tools

iTead 3G shield for Arduino (Arduino Compatible)

iTeadStudio
ASHITE3G
€62.50
The 3G shield is based on SIM5216E module. The SIM5216 series is Multi-Band HSDPA/WCDMA/GSM/GPRS/EDGE module solution which supports HSDPA up to 3.6Mbps for downlink data transfer. The 3G shield can be used for 3G communication, it is controlled via AT commands and fully compatible with Arduino.
 2
Out of stock
Arduino

iTead WiFi shield for Arduino (Arduino Compatible)

iTeadStudio
ASHITEWIFI
€50.00
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Iteaduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield.
 2
  • Reduced price / -€1.67
Available
Dev. Tools

Iteaduino BT (Arduino-compatible with built-in...

iTeadStudio
MCB00001
€30.00 €31.67
Iteaduino-BT is an Arduino compatible board with a master/slave Bluetooth Module HC-05. It based on Arduino Duemilanove, 100% compatible to its existing program, shield and IDE. On the hardware part, remarkable changes are taken to improve the flexibility and user experience.
 2
Out of stock
Arduino

ITeaduino Nano USB Microcontroller

iTeadStudio
MCB00002C
€14.17
The Iteaduino Nano is a small, complete, and breadboard-friendly board based on the Adruino Nano 3.0. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Micro USB cable instead of a standard one.
 2
  • Reduced price / -€20.00
Available
Dev. Tools

Iteaduino Plus A20 (ARM Linux board, Dual-core...

iTeadStudio
LINAA20ITEA
€55.00 €75.00
Iteaduino Plus is an open source ARM development board, which is based on Allwinner A20 SoC, small size, hacker friendly, extendable and very low-cost. Compare with Raspberry Pi, it has higher performance, SATA supported and more extension interfaces.
 2
Available
Home

ITeaduino Tiny

iTeadStudio
MCBITDTINY
€7.50
Iteaduino Tiny is a mini development board based on Attiny85 master, which is cheap, compact and easy to use with low power consumption. The mainboard is a derivative board with reference to digispark design, and it supports use of specific Arduino IDE and uses Arduino syntax for programming which is quite convenient.
 2
Out of stock
Dev. Tools

Music Player Shield for Arduino (MP3, SD card,...

iTeadStudio
ASHITEMUSPLA
€20.00
The iTead Music Player Shield is based on CECL08D. The CECL08D chip can be used to decode MP3/WAV format audio file. The music player shield has SD card socket and USB interface, supporting USB and SD card play. Just plug and play!
Product added to wishlist
Product added to compare.