Wireless Connectivity

 2
Available
Dev. Tools

Wireless XBEE SD Shield (SD, Micro-SD Card and...

ECRMCS01109S
€11.67
The Wireless SD card shield allows an Arduino board to communicate wirelessly using a wireless module, and adds storage to your Arduino project. The XBee Shield is based on the Xbee modules from Digi, but can use any Bee module with the same footprint. It supports SD, SDHC, or MicroSD TF cards. Use the on-board toggle switch to select the SD card type....
 2
Available
Electronics

Wio Link (ESP8266, Grove and Battery charging...

MCBWIOLINK
€17.50
Wio Link is designed to simplify your IoT development. It is an ESP8266 based open-source Wi-Fi development board to create IoT applications by virtualizing plug-n-play modules to RESTful APIs with mobile APPs. The traditional methodology of building IoT applications consists of electronic engineering, micro-controller programming, network programming,...
 2
  • Reduced price / -€6.00
Available
Dev. Tools

WiFiMCU Wireless WiFi dev Board (LUA scripting,...

ST Microelectronics
MCBWIFIMCU
€9.00 €15.00
WiFiMCU is developed based on EMW3165 by Headquarters EMW3165. It can run Lua scripts directly; operate hardware resource; achieve product prototypes. EMW3165 is a low-power embedded WiFi module, which is developed by the Shanghai MXCHIP Technology Co., Ltd. It incorporates a WiFi RF-Chip and a microcontroller based on STM Cortex-M4. The WiFi module...
 2
  • Reduced price / -€2.55
Available
Dev. Tools

USB Wifi Miniature dongle (pcDuino, Raspberry...

WIRMINUSBWIF
€8.75 €11.30
You can simply plug this USB Wifi dongle into the USB port of your Dev Board and you're ready to connect to a nearby wireless network!
 2
Available
Electronics

USB Wifi dongle with Antenna (pcDuino,...

WIRANTUSBWIF
€14.00
You can simply plug this USB Wifi dongle into the USB port of your Dev Board and you're ready to connect to a nearby wireless network with extra power thanks to its antenna.
 2
Out of stock
Electronics

USB Wifi Adapter with long antenna (Wireless-N,...

WIREDUPANTN
€16.67
This is s a 300Mbps wireless USB lan adapter suitable for desktop and notebooks and other equipments for wireless connections, offering a convenient way to get wifi.Ideal for Raspberry Pi, Beagleboard and other embedded linux boards where a connectivity is needed far from the AP.
 2
Available
Home

USB GPS & Glonass adapter (Vk-172, Gmouse,...

USBGPSVK172
€15.83
Simple and powerful USB GPS & Glonass adapter with fast fix and high sensitivity. Compatible with most operating systems and machines (including Raspberry Pi, CubieBoard, NUC, linux and windows)
 2
Available
Wireless Connectivity

SPK-B Bluetooth audio module

Electrogragon
SNDBTSPKB
€7.00
Bluetooth module is designed for product design of Bluetooth speakers. Has the characteristics of high integration, small size, just with a few external components will be able to achieve its powerful features. With A2DP, AVRCP transmission and remote control protocol any Bluetooth audio device (such as: Bluetooth-enabled mobile phone, computer Bluetooth...
 2
Available
Wireless Connectivity

Smart Socket WiFi Orvibo S20 (EU Plug)

RELORVS20EU
€22.50
Instantly convert any plug into a connected and intelligent outlet with a convenient timer function that works both on your smart phone and has a manual control knob. Perfect for lighting and other appliance with pre-set ON/Off functions. Control devices from anywhere
 2
Out of stock
Dev. Tools

SIM900 GSM/GPRS Module

GSMSIM900
€37.50
This GSM module is a breakout board and minimum system of SIM900 Quad-band GSM/GPRS module. It can communicate with controllers via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). This module support software power on, reset, data transfer and audio.
 2
Available
Dev. Tools

SIM800L GSM/GPRS Module

WIRELESIM800L
€20.00
This module power supply of 5V, computer debugging USB to TTL serial port. 800MA power supply output current , TTL serial port compatible with 3.3V and 5V MCU, the MCU can be connected directly. IPX antenna interface can switch PCB antenna, glue stick antenna and sucker antenna. SIM800L 4 frequency data communications, globally available.
 2
Available
Arduino

Seeed Studio WiFi shield for Arduino (Arduino...

iTeadStudio
ASHSESWLS06201P
€45.00
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Seeeduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield. It features an independent antenna which can cover a wider range and transmit stronger signals. With supports for common TCP, UDP and FTP...
 2
Available
Electronics

RN-XV Wifly XBee (RN-171 XV, Wire antenna)

WIRRN171XV
€35.00
RN-XV XBEE The RN-171-XV is a 802.11 b/g solution especially designed for designers who want to migrate their existing 802.15.4 architecture to a more standard TCP/IP-based platform without redesigning their existing hardware. Based on a pseudo standard footprint often found in embedded applications, the Roving Networks’ RN-171-XV module provides Wi-Fi...
 2
Available
Home

Raspberry PI SIM900 GSM/GPRS Module Adapter Kit

CONRPISIM900
€4.00
This is an adapter plate kit for Raspberry Pi board to SIM900 module, which allows users to easily connect Raspberry Pi and SIM900 module and extends GSM / GPRS function for Raspberry Pi to achieve additional features, such as message receiving and sending, phone call dialing and answering and GPRS wireless data communication, etc. SIM900 board and...
 2
Available
Electronics

PN532 NFC RFID module V3 kits -- NFC with...

KITTAORFID
€12.00
NFC is a popular technology in recent years. We often heard this work while smart phone company such as Samsung or HTC introduces their latest high-end phones. Almost all the high-end phone in the market support NFC.
 2
Available
Electronics

PN532 NFC MODULE

WIRITENFCPN532
€16.00
PN532 NFC module, as its name implies, is based on PN532 chip and used for 13.56MHz near field communication. The module is equipped with onboard antenna, thus no external antenna coil is needed. It is compatible with SPI, IIC and UART interface for communication. With NFC library support for Arduino and Raspberry Pi offered by us, it is quite convenient...
 2
  • Reduced price / -€5.00
Out of stock
Dev. Tools

nRF24L01+ with PA and LNA 2.4Ghz RF module...

iTeadStudio
WIRITENRF24L01PALNA
€7.00 €12.00
This is a long distance 2.4G wireless module which basic on nRF24L01+ chip, and there is the PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
 2
Available
Dev. Tools

nRF24L01+ 2.4Ghz RF module (improved range)

iTeadStudio
WIRITENRF24L01
€4.00
This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+.This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401+ and add some extra pipelines, buffers, and an auto-retransmit feature.
 2
Out of stock
Electronics

Mini 125Khz RFID Module - Pre-Soldered Antenna...

Seeed Studio
WIRSEDRFIDMIN70MM
€10.00
This RFID module is designed for reading code from 125Khz card compatible read-only tags and read/write card. It will notify whenever 125Khz tag approaches, the tag serial number will be send via TX pin or Wiegand pin. Super small size design, it is widely applied in office/home security, personal identification, access control, anti-forgery, interactive...
Product added to wishlist
Product added to compare.