Prototyping PCBs

 2
Available
Raspberry Pi

Stack HAT for Raspberry Pi, stacks up to 5 HATs...

CONELERAS5HAT
€20.00
Standard Raspberry Pi connectivity, directly pluggable OR through ribbon cable 5 sets of 2x20 pinheaders, connect multi HATs together USB external power port, provides enough power supply for multi HATs Clear and descriptive pin labels for easy use Reserved jumper pads on the bottom side, pin connections are changeable by soldering, to avoid pin conflicts
 2
  • Reduced price / -€1.70
Available
Power and Energy

Grove - XBee Carrier Charging Lipo and solar

MCBGROVXBEECAR
€16.30 €18.00
Charging Lipo and solar XBee Carrier is a Wireless Sensor Network (WSN) base board designed for Bee series and groves. It is primarily suitable for standalone Bee Nodes like RN-171-XV WiFly, RFBee, Wifi Bee. Besides a Bee receptacle, there are also two Grove connectors. The board cab be powered by a lithium battery or through USB cable. You can use a...
 2
Out of stock
Electronics

Mega Proto Grove Xbee Screw Shield

ASHMEGPROTOSCR
€12.50
Mega Proto Screw Shield breaks out all pins of Arduino Mega 2560 and some of the pins are extended to 3.5mm-spacing screw terminals. Besides, it is equipped with 2.54 pitched universal electronic brick interface, 4-pin grove electronic brick interface as well as XBee interface for pins D0 ~ 21 and A0 ~ 15, which is a great help to design of our...
 2
Available
Prototyping

Cubieboard Proto with VGA connector

PCBCUBPRO
€11.25
This nice protoboard for CubieBoard features a VGA connector and standard 2.54mm pitch connectors to use with all standard components.
 2
Available
Dev. Tools

RPI GPIO Shield (Arduino Layout, Logic Volt...

PCBRPIBRI
€11.00
If you are an expert but just step into raspberry pi, this item will create a good bridge for your learning purpose. All the Raspberry pi pins are “redefined” into arduino style pins, so you can focus on python programming and higher level controlling by using RPI.
Available
Arduino

SD Micro SD Card Grove Shield

ASHSESSDCARD
€10.83
SD card shield is a Break out board for standard SD card. With flash memory card price dropping,it is the time to add mass storage and data logging to your project. You can select 3.3V or IO port power supply with the switch on board in order to work with different library.
 2
Available
Arduino

Protoshield Kit Remixed for Arduino (Arduino...

Seeed Studio
ASHSESARDPROTOSHIELD
€9.92
Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1" prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included to help you get started with your custom...
 2
  • Reduced price / -€2.00
Available
Shields

ProtoScrewShield for Arduino (Arduino Compatible)

iTeadStudio
ASH00001
€8.00 €10.00
Your project uses external peripherals and needs them connected securely ? Don't look twice, and take that shield. You can add components on it as it has a 0.1" spaced through hole for standard dip components as well as stackable headers and screw headers.
  • Reduced price / -€3.20
Available
Dev. Tools

T Board for pcDuino

PCBPCDTBOARD
€7.80 €11.00
T Board to Bridge Arduino Shield to pcDuino with Level Shifter
 2
Available
Electronics

Prototype Shield for Raspberry Pi

PCBRPIPROTO
€7.08
Prototype Shield for Raspberry Pi is a prototype board that you can combine your raspberry pi with other components, modules. As a prototype board, it also provides power and state indicator light. Besides. Note: not include Raspberry Pi
 2
  • Reduced price / -€2.44
Available
Arduino

Bees Shield

Seeed Studio
SESINT119B2P
€6.67 €9.11
Bees shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. Aside from dual Bee style 20p 2.0 pitch socket, it also has large proto area, customizable software, serial, port for easier prototyping.
 2
Available
Prototyping

ScrewShield for Arduino NANO (Arduino Compatible)

ASH00001B
€6.67
Your project uses external peripherals and needs them connected securely ? Don't look twice, and take that shield. You can add components on it as it has a 0.1" spaced through hole for standard dip components as well as stackable headers and screw headers.
 2
Available
Prototyping

Protoboard with...

ECRPBO10201B
€6.00
This is a versatile protoboard for projects where you need to use SMD components as well as Through-holes ones.
 2
Available
Home

Protoboard with...

ECRPBO10101B
€5.21
This is a versatile protoboard for projects where you need to use SMD components as well as Through-holes ones.
 2
Available
Tools

Green IC Universal ZIF Socket 40 Pin IC Test...

ADAFLYZIFSOC40
€5.00
This is a high-quality, easy to use 40 pin ZIF socket that is 0.6" wide with gold-plated contacts. Compatible with 0.3" up to 0.6" wide ICs up to 40-pins. Makes for easy connecting or programming to many DIP ICs. High conductivity terminals create solid connections. Armature makes it easy to open and close socket.
 2
Available
Prototyping

Breakout for Raspberry Pi A+/B+/2/3/4 to...

BRBRPIPLTCOB
€4.00
This is a T-Cobbler breakout kit used for extending the GPIO interface on Raspberry Pi B+,2  3 4 to breadboard. It helps you to make the connections between Raspberry Pi B+/2/3/4 breadboard become simple.
Available
Electronics

Solderable Breadboard PCB ( protoboard )

BRBELDSOLD
€4.00
Breadboard layout PCB board, including two power channels on the side, and all same prototyping holes in the middle. This is a small size breadboard-style PCB board. Double side board.
 2
Available
Home

Breakout for Raspberry Pi to Breadboard...

BRBRPITCOB
€3.75
This is a T-Cobbler breakout kit used for extending the GPIO interface on Raspberry Pi to breadboard. It helps you to make the connections between Raspberry Pi and breadboard become simple.
 2
Available
Electronics

QFN / QFP / TQFP / LQFP 16-64 to DIP...

PCBITESMDADA1664
€3.75
This is a QFN / QFP / TQFP / LQFP 16-64 to DIP Adapter/ Breakout Board, it can change QFN / QFP / TQFP / LQFP footprint IC into DIP breakout, then you can use then in prototype board or bread board.
Available
Prototyping

9x15 Protoboard 2.54mm

PCB00007
€3.50
High quality protoboard gives you 9x15cm of building space for through-hole components with 2.54mm spaced holes.
 2
Available
Electronics

QFN / QFP / TQFP / LQFP 16-80 to DIP...

PCBITESMDADA1680
€3.50
This is a QFN / QFP / TQFP / LQFP 16-80 to DIP Adapter/ Breakout Board, it can change QFN / QFP / TQFP / LQFP footprint IC into DIP breakout, then you can use then in prototype board or bread board.
Available
Electronics

8x12 Protoboard

PCBPROTO8X12
€3.50
8cm x 12cm protoboard with 2.54mm spacing
  • Reduced price / -€2.00
Available
Electronics

Xbee Zigbee to 2.54 DIP Breakout

PCBXBEEBRK
€1.33 €3.33
This board breaks out all pins of the XBee to 2.54mm pitch.  
Product added to wishlist
Product added to compare.